1083 lines
25 KiB
C
1083 lines
25 KiB
C
|
/*
|
||
|
* Copyright © 2009 - Maxim Levitsky
|
||
|
* driver for Ricoh xD readers
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
* published by the Free Software Foundation.
|
||
|
*/
|
||
|
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/jiffies.h>
|
||
|
#include <linux/workqueue.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/pci.h>
|
||
|
#include <linux/pci_ids.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <asm/byteorder.h>
|
||
|
#include <linux/sched.h>
|
||
|
#include "sm_common.h"
|
||
|
#include "r852.h"
|
||
|
|
||
|
|
||
|
static bool r852_enable_dma = 1;
|
||
|
module_param(r852_enable_dma, bool, S_IRUGO);
|
||
|
MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)");
|
||
|
|
||
|
static int debug;
|
||
|
module_param(debug, int, S_IRUGO | S_IWUSR);
|
||
|
MODULE_PARM_DESC(debug, "Debug level (0-2)");
|
||
|
|
||
|
/* read register */
|
||
|
static inline uint8_t r852_read_reg(struct r852_device *dev, int address)
|
||
|
{
|
||
|
uint8_t reg = readb(dev->mmio + address);
|
||
|
return reg;
|
||
|
}
|
||
|
|
||
|
/* write register */
|
||
|
static inline void r852_write_reg(struct r852_device *dev,
|
||
|
int address, uint8_t value)
|
||
|
{
|
||
|
writeb(value, dev->mmio + address);
|
||
|
mmiowb();
|
||
|
}
|
||
|
|
||
|
|
||
|
/* read dword sized register */
|
||
|
static inline uint32_t r852_read_reg_dword(struct r852_device *dev, int address)
|
||
|
{
|
||
|
uint32_t reg = le32_to_cpu(readl(dev->mmio + address));
|
||
|
return reg;
|
||
|
}
|
||
|
|
||
|
/* write dword sized register */
|
||
|
static inline void r852_write_reg_dword(struct r852_device *dev,
|
||
|
int address, uint32_t value)
|
||
|
{
|
||
|
writel(cpu_to_le32(value), dev->mmio + address);
|
||
|
mmiowb();
|
||
|
}
|
||
|
|
||
|
/* returns pointer to our private structure */
|
||
|
static inline struct r852_device *r852_get_dev(struct mtd_info *mtd)
|
||
|
{
|
||
|
struct nand_chip *chip = mtd_to_nand(mtd);
|
||
|
return nand_get_controller_data(chip);
|
||
|
}
|
||
|
|
||
|
|
||
|
/* check if controller supports dma */
|
||
|
static void r852_dma_test(struct r852_device *dev)
|
||
|
{
|
||
|
dev->dma_usable = (r852_read_reg(dev, R852_DMA_CAP) &
|
||
|
(R852_DMA1 | R852_DMA2)) == (R852_DMA1 | R852_DMA2);
|
||
|
|
||
|
if (!dev->dma_usable)
|
||
|
message("Non dma capable device detected, dma disabled");
|
||
|
|
||
|
if (!r852_enable_dma) {
|
||
|
message("disabling dma on user request");
|
||
|
dev->dma_usable = 0;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Enable dma. Enables ether first or second stage of the DMA,
|
||
|
* Expects dev->dma_dir and dev->dma_state be set
|
||
|
*/
|
||
|
static void r852_dma_enable(struct r852_device *dev)
|
||
|
{
|
||
|
uint8_t dma_reg, dma_irq_reg;
|
||
|
|
||
|
/* Set up dma settings */
|
||
|
dma_reg = r852_read_reg_dword(dev, R852_DMA_SETTINGS);
|
||
|
dma_reg &= ~(R852_DMA_READ | R852_DMA_INTERNAL | R852_DMA_MEMORY);
|
||
|
|
||
|
if (dev->dma_dir)
|
||
|
dma_reg |= R852_DMA_READ;
|
||
|
|
||
|
if (dev->dma_state == DMA_INTERNAL) {
|
||
|
dma_reg |= R852_DMA_INTERNAL;
|
||
|
/* Precaution to make sure HW doesn't write */
|
||
|
/* to random kernel memory */
|
||
|
r852_write_reg_dword(dev, R852_DMA_ADDR,
|
||
|
cpu_to_le32(dev->phys_bounce_buffer));
|
||
|
} else {
|
||
|
dma_reg |= R852_DMA_MEMORY;
|
||
|
r852_write_reg_dword(dev, R852_DMA_ADDR,
|
||
|
cpu_to_le32(dev->phys_dma_addr));
|
||
|
}
|
||
|
|
||
|
/* Precaution: make sure write reached the device */
|
||
|
r852_read_reg_dword(dev, R852_DMA_ADDR);
|
||
|
|
||
|
r852_write_reg_dword(dev, R852_DMA_SETTINGS, dma_reg);
|
||
|
|
||
|
/* Set dma irq */
|
||
|
dma_irq_reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
|
||
|
r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
|
||
|
dma_irq_reg |
|
||
|
R852_DMA_IRQ_INTERNAL |
|
||
|
R852_DMA_IRQ_ERROR |
|
||
|
R852_DMA_IRQ_MEMORY);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Disable dma, called from the interrupt handler, which specifies
|
||
|
* success of the operation via 'error' argument
|
||
|
*/
|
||
|
static void r852_dma_done(struct r852_device *dev, int error)
|
||
|
{
|
||
|
WARN_ON(dev->dma_stage == 0);
|
||
|
|
||
|
r852_write_reg_dword(dev, R852_DMA_IRQ_STA,
|
||
|
r852_read_reg_dword(dev, R852_DMA_IRQ_STA));
|
||
|
|
||
|
r852_write_reg_dword(dev, R852_DMA_SETTINGS, 0);
|
||
|
r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE, 0);
|
||
|
|
||
|
/* Precaution to make sure HW doesn't write to random kernel memory */
|
||
|
r852_write_reg_dword(dev, R852_DMA_ADDR,
|
||
|
cpu_to_le32(dev->phys_bounce_buffer));
|
||
|
r852_read_reg_dword(dev, R852_DMA_ADDR);
|
||
|
|
||
|
dev->dma_error = error;
|
||
|
dev->dma_stage = 0;
|
||
|
|
||
|
if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer)
|
||
|
pci_unmap_single(dev->pci_dev, dev->phys_dma_addr, R852_DMA_LEN,
|
||
|
dev->dma_dir ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Wait, till dma is done, which includes both phases of it
|
||
|
*/
|
||
|
static int r852_dma_wait(struct r852_device *dev)
|
||
|
{
|
||
|
long timeout = wait_for_completion_timeout(&dev->dma_done,
|
||
|
msecs_to_jiffies(1000));
|
||
|
if (!timeout) {
|
||
|
dbg("timeout waiting for DMA interrupt");
|
||
|
return -ETIMEDOUT;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Read/Write one page using dma. Only pages can be read (512 bytes)
|
||
|
*/
|
||
|
static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
|
||
|
{
|
||
|
int bounce = 0;
|
||
|
unsigned long flags;
|
||
|
int error;
|
||
|
|
||
|
dev->dma_error = 0;
|
||
|
|
||
|
/* Set dma direction */
|
||
|
dev->dma_dir = do_read;
|
||
|
dev->dma_stage = 1;
|
||
|
reinit_completion(&dev->dma_done);
|
||
|
|
||
|
dbg_verbose("doing dma %s ", do_read ? "read" : "write");
|
||
|
|
||
|
/* Set initial dma state: for reading first fill on board buffer,
|
||
|
from device, for writes first fill the buffer from memory*/
|
||
|
dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;
|
||
|
|
||
|
/* if incoming buffer is not page aligned, we should do bounce */
|
||
|
if ((unsigned long)buf & (R852_DMA_LEN-1))
|
||
|
bounce = 1;
|
||
|
|
||
|
if (!bounce) {
|
||
|
dev->phys_dma_addr = pci_map_single(dev->pci_dev, (void *)buf,
|
||
|
R852_DMA_LEN,
|
||
|
(do_read ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
|
||
|
|
||
|
if (pci_dma_mapping_error(dev->pci_dev, dev->phys_dma_addr))
|
||
|
bounce = 1;
|
||
|
}
|
||
|
|
||
|
if (bounce) {
|
||
|
dbg_verbose("dma: using bounce buffer");
|
||
|
dev->phys_dma_addr = dev->phys_bounce_buffer;
|
||
|
if (!do_read)
|
||
|
memcpy(dev->bounce_buffer, buf, R852_DMA_LEN);
|
||
|
}
|
||
|
|
||
|
/* Enable DMA */
|
||
|
spin_lock_irqsave(&dev->irqlock, flags);
|
||
|
r852_dma_enable(dev);
|
||
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
||
|
|
||
|
/* Wait till complete */
|
||
|
error = r852_dma_wait(dev);
|
||
|
|
||
|
if (error) {
|
||
|
r852_dma_done(dev, error);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
if (do_read && bounce)
|
||
|
memcpy((void *)buf, dev->bounce_buffer, R852_DMA_LEN);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Program data lines of the nand chip to send data to it
|
||
|
*/
|
||
|
static void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
|
||
|
{
|
||
|
struct r852_device *dev = r852_get_dev(mtd);
|
||
|
uint32_t reg;
|
||
|
|
||
|
/* Don't allow any access to hardware if we suspect card removal */
|
||
|
if (dev->card_unstable)
|
||
|
return;
|
||
|
|
||
|
/* Special case for whole sector read */
|
||
|
if (len == R852_DMA_LEN && dev->dma_usable) {
|
||
|
r852_do_dma(dev, (uint8_t *)buf, 0);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/* write DWORD chinks - faster */
|
||
|
while (len >= 4) {
|
||
|
reg = buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24;
|
||
|
r852_write_reg_dword(dev, R852_DATALINE, reg);
|
||
|
buf += 4;
|
||
|
len -= 4;
|
||
|
|
||
|
}
|
||
|
|
||
|
/* write rest */
|
||
|
while (len > 0) {
|
||
|
r852_write_reg(dev, R852_DATALINE, *buf++);
|
||
|
len--;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Read data lines of the nand chip to retrieve data
|
||
|
*/
|
||
|
static void r852_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
|
||
|
{
|
||
|
struct r852_device *dev = r852_get_dev(mtd);
|
||
|
uint32_t reg;
|
||
|
|
||
|
if (dev->card_unstable) {
|
||
|
/* since we can't signal error here, at least, return
|
||
|
predictable buffer */
|
||
|
memset(buf, 0, len);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/* special case for whole sector read */
|
||
|
if (len == R852_DMA_LEN && dev->dma_usable) {
|
||
|
r852_do_dma(dev, buf, 1);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/* read in dword sized chunks */
|
||
|
while (len >= 4) {
|
||
|
|
||
|
reg = r852_read_reg_dword(dev, R852_DATALINE);
|
||
|
*buf++ = reg & 0xFF;
|
||
|
*buf++ = (reg >> 8) & 0xFF;
|
||
|
*buf++ = (reg >> 16) & 0xFF;
|
||
|
*buf++ = (reg >> 24) & 0xFF;
|
||
|
len -= 4;
|
||
|
}
|
||
|
|
||
|
/* read the reset by bytes */
|
||
|
while (len--)
|
||
|
*buf++ = r852_read_reg(dev, R852_DATALINE);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Read one byte from nand chip
|
||
|
*/
|
||
|
static uint8_t r852_read_byte(struct mtd_info *mtd)
|
||
|
{
|
||
|
struct r852_device *dev = r852_get_dev(mtd);
|
||
|
|
||
|
/* Same problem as in r852_read_buf.... */
|
||
|
if (dev->card_unstable)
|
||
|
return 0;
|
||
|
|
||
|
return r852_read_reg(dev, R852_DATALINE);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Control several chip lines & send commands
|
||
|
*/
|
||
|
static void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl)
|
||
|
{
|
||
|
struct r852_device *dev = r852_get_dev(mtd);
|
||
|
|
||
|
if (dev->card_unstable)
|
||
|
return;
|
||
|
|
||
|
if (ctrl & NAND_CTRL_CHANGE) {
|
||
|
|
||
|
dev->ctlreg &= ~(R852_CTL_DATA | R852_CTL_COMMAND |
|
||
|
R852_CTL_ON | R852_CTL_CARDENABLE);
|
||
|
|
||
|
if (ctrl & NAND_ALE)
|
||
|
dev->ctlreg |= R852_CTL_DATA;
|
||
|
|
||
|
if (ctrl & NAND_CLE)
|
||
|
dev->ctlreg |= R852_CTL_COMMAND;
|
||
|
|
||
|
if (ctrl & NAND_NCE)
|
||
|
dev->ctlreg |= (R852_CTL_CARDENABLE | R852_CTL_ON);
|
||
|
else
|
||
|
dev->ctlreg &= ~R852_CTL_WRITE;
|
||
|
|
||
|
/* when write is stareted, enable write access */
|
||
|
if (dat == NAND_CMD_ERASE1)
|
||
|
dev->ctlreg |= R852_CTL_WRITE;
|
||
|
|
||
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
||
|
}
|
||
|
|
||
|
/* HACK: NAND_CMD_SEQIN is called without NAND_CTRL_CHANGE, but we need
|
||
|
to set write mode */
|
||
|
if (dat == NAND_CMD_SEQIN && (dev->ctlreg & R852_CTL_COMMAND)) {
|
||
|
dev->ctlreg |= R852_CTL_WRITE;
|
||
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
||
|
}
|
||
|
|
||
|
if (dat != NAND_CMD_NONE)
|
||
|
r852_write_reg(dev, R852_DATALINE, dat);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Wait till card is ready.
|
||
|
* based on nand_wait, but returns errors on DMA error
|
||
|
*/
|
||
|
static int r852_wait(struct mtd_info *mtd, struct nand_chip *chip)
|
||
|
{
|
||
|
struct r852_device *dev = nand_get_controller_data(chip);
|
||
|
|
||
|
unsigned long timeout;
|
||
|
int status;
|
||
|
|
||
|
timeout = jiffies + (chip->state == FL_ERASING ?
|
||
|
msecs_to_jiffies(400) : msecs_to_jiffies(20));
|
||
|
|
||
|
while (time_before(jiffies, timeout))
|
||
|
if (chip->dev_ready(mtd))
|
||
|
break;
|
||
|
|
||
|
chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
|
||
|
status = (int)chip->read_byte(mtd);
|
||
|
|
||
|
/* Unfortunelly, no way to send detailed error status... */
|
||
|
if (dev->dma_error) {
|
||
|
status |= NAND_STATUS_FAIL;
|
||
|
dev->dma_error = 0;
|
||
|
}
|
||
|
return status;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Check if card is ready
|
||
|
*/
|
||
|
|
||
|
static int r852_ready(struct mtd_info *mtd)
|
||
|
{
|
||
|
struct r852_device *dev = r852_get_dev(mtd);
|
||
|
return !(r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_BUSY);
|
||
|
}
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Set ECC engine mode
|
||
|
*/
|
||
|
|
||
|
static void r852_ecc_hwctl(struct mtd_info *mtd, int mode)
|
||
|
{
|
||
|
struct r852_device *dev = r852_get_dev(mtd);
|
||
|
|
||
|
if (dev->card_unstable)
|
||
|
return;
|
||
|
|
||
|
switch (mode) {
|
||
|
case NAND_ECC_READ:
|
||
|
case NAND_ECC_WRITE:
|
||
|
/* enable ecc generation/check*/
|
||
|
dev->ctlreg |= R852_CTL_ECC_ENABLE;
|
||
|
|
||
|
/* flush ecc buffer */
|
||
|
r852_write_reg(dev, R852_CTL,
|
||
|
dev->ctlreg | R852_CTL_ECC_ACCESS);
|
||
|
|
||
|
r852_read_reg_dword(dev, R852_DATALINE);
|
||
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
||
|
return;
|
||
|
|
||
|
case NAND_ECC_READSYN:
|
||
|
/* disable ecc generation */
|
||
|
dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
|
||
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Calculate ECC, only used for writes
|
||
|
*/
|
||
|
|
||
|
static int r852_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat,
|
||
|
uint8_t *ecc_code)
|
||
|
{
|
||
|
struct r852_device *dev = r852_get_dev(mtd);
|
||
|
struct sm_oob *oob = (struct sm_oob *)ecc_code;
|
||
|
uint32_t ecc1, ecc2;
|
||
|
|
||
|
if (dev->card_unstable)
|
||
|
return 0;
|
||
|
|
||
|
dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
|
||
|
r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
|
||
|
|
||
|
ecc1 = r852_read_reg_dword(dev, R852_DATALINE);
|
||
|
ecc2 = r852_read_reg_dword(dev, R852_DATALINE);
|
||
|
|
||
|
oob->ecc1[0] = (ecc1) & 0xFF;
|
||
|
oob->ecc1[1] = (ecc1 >> 8) & 0xFF;
|
||
|
oob->ecc1[2] = (ecc1 >> 16) & 0xFF;
|
||
|
|
||
|
oob->ecc2[0] = (ecc2) & 0xFF;
|
||
|
oob->ecc2[1] = (ecc2 >> 8) & 0xFF;
|
||
|
oob->ecc2[2] = (ecc2 >> 16) & 0xFF;
|
||
|
|
||
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Correct the data using ECC, hw did almost everything for us
|
||
|
*/
|
||
|
|
||
|
static int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
|
||
|
uint8_t *read_ecc, uint8_t *calc_ecc)
|
||
|
{
|
||
|
uint32_t ecc_reg;
|
||
|
uint8_t ecc_status, err_byte;
|
||
|
int i, error = 0;
|
||
|
|
||
|
struct r852_device *dev = r852_get_dev(mtd);
|
||
|
|
||
|
if (dev->card_unstable)
|
||
|
return 0;
|
||
|
|
||
|
if (dev->dma_error) {
|
||
|
dev->dma_error = 0;
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
|
||
|
ecc_reg = r852_read_reg_dword(dev, R852_DATALINE);
|
||
|
r852_write_reg(dev, R852_CTL, dev->ctlreg);
|
||
|
|
||
|
for (i = 0 ; i <= 1 ; i++) {
|
||
|
|
||
|
ecc_status = (ecc_reg >> 8) & 0xFF;
|
||
|
|
||
|
/* ecc uncorrectable error */
|
||
|
if (ecc_status & R852_ECC_FAIL) {
|
||
|
dbg("ecc: unrecoverable error, in half %d", i);
|
||
|
error = -EBADMSG;
|
||
|
goto exit;
|
||
|
}
|
||
|
|
||
|
/* correctable error */
|
||
|
if (ecc_status & R852_ECC_CORRECTABLE) {
|
||
|
|
||
|
err_byte = ecc_reg & 0xFF;
|
||
|
dbg("ecc: recoverable error, "
|
||
|
"in half %d, byte %d, bit %d", i,
|
||
|
err_byte, ecc_status & R852_ECC_ERR_BIT_MSK);
|
||
|
|
||
|
dat[err_byte] ^=
|
||
|
1 << (ecc_status & R852_ECC_ERR_BIT_MSK);
|
||
|
error++;
|
||
|
}
|
||
|
|
||
|
dat += 256;
|
||
|
ecc_reg >>= 16;
|
||
|
}
|
||
|
exit:
|
||
|
return error;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* This is copy of nand_read_oob_std
|
||
|
* nand_read_oob_syndrome assumes we can send column address - we can't
|
||
|
*/
|
||
|
static int r852_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
|
||
|
int page)
|
||
|
{
|
||
|
chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
|
||
|
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Start the nand engine
|
||
|
*/
|
||
|
|
||
|
static void r852_engine_enable(struct r852_device *dev)
|
||
|
{
|
||
|
if (r852_read_reg_dword(dev, R852_HW) & R852_HW_UNKNOWN) {
|
||
|
r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
|
||
|
r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
|
||
|
} else {
|
||
|
r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
|
||
|
r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
|
||
|
}
|
||
|
msleep(300);
|
||
|
r852_write_reg(dev, R852_CTL, 0);
|
||
|
}
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Stop the nand engine
|
||
|
*/
|
||
|
|
||
|
static void r852_engine_disable(struct r852_device *dev)
|
||
|
{
|
||
|
r852_write_reg_dword(dev, R852_HW, 0);
|
||
|
r852_write_reg(dev, R852_CTL, R852_CTL_RESET);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Test if card is present
|
||
|
*/
|
||
|
|
||
|
static void r852_card_update_present(struct r852_device *dev)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
uint8_t reg;
|
||
|
|
||
|
spin_lock_irqsave(&dev->irqlock, flags);
|
||
|
reg = r852_read_reg(dev, R852_CARD_STA);
|
||
|
dev->card_detected = !!(reg & R852_CARD_STA_PRESENT);
|
||
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Update card detection IRQ state according to current card state
|
||
|
* which is read in r852_card_update_present
|
||
|
*/
|
||
|
static void r852_update_card_detect(struct r852_device *dev)
|
||
|
{
|
||
|
int card_detect_reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
|
||
|
dev->card_unstable = 0;
|
||
|
|
||
|
card_detect_reg &= ~(R852_CARD_IRQ_REMOVE | R852_CARD_IRQ_INSERT);
|
||
|
card_detect_reg |= R852_CARD_IRQ_GENABLE;
|
||
|
|
||
|
card_detect_reg |= dev->card_detected ?
|
||
|
R852_CARD_IRQ_REMOVE : R852_CARD_IRQ_INSERT;
|
||
|
|
||
|
r852_write_reg(dev, R852_CARD_IRQ_ENABLE, card_detect_reg);
|
||
|
}
|
||
|
|
||
|
static ssize_t r852_media_type_show(struct device *sys_dev,
|
||
|
struct device_attribute *attr, char *buf)
|
||
|
{
|
||
|
struct mtd_info *mtd = container_of(sys_dev, struct mtd_info, dev);
|
||
|
struct r852_device *dev = r852_get_dev(mtd);
|
||
|
char *data = dev->sm ? "smartmedia" : "xd";
|
||
|
|
||
|
strcpy(buf, data);
|
||
|
return strlen(data);
|
||
|
}
|
||
|
|
||
|
static DEVICE_ATTR(media_type, S_IRUGO, r852_media_type_show, NULL);
|
||
|
|
||
|
|
||
|
/* Detect properties of card in slot */
|
||
|
static void r852_update_media_status(struct r852_device *dev)
|
||
|
{
|
||
|
uint8_t reg;
|
||
|
unsigned long flags;
|
||
|
int readonly;
|
||
|
|
||
|
spin_lock_irqsave(&dev->irqlock, flags);
|
||
|
if (!dev->card_detected) {
|
||
|
message("card removed");
|
||
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
||
|
return ;
|
||
|
}
|
||
|
|
||
|
readonly = r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_RO;
|
||
|
reg = r852_read_reg(dev, R852_DMA_CAP);
|
||
|
dev->sm = (reg & (R852_DMA1 | R852_DMA2)) && (reg & R852_SMBIT);
|
||
|
|
||
|
message("detected %s %s card in slot",
|
||
|
dev->sm ? "SmartMedia" : "xD",
|
||
|
readonly ? "readonly" : "writeable");
|
||
|
|
||
|
dev->readonly = readonly;
|
||
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Register the nand device
|
||
|
* Called when the card is detected
|
||
|
*/
|
||
|
static int r852_register_nand_device(struct r852_device *dev)
|
||
|
{
|
||
|
struct mtd_info *mtd = nand_to_mtd(dev->chip);
|
||
|
|
||
|
WARN_ON(dev->card_registred);
|
||
|
|
||
|
mtd->dev.parent = &dev->pci_dev->dev;
|
||
|
|
||
|
if (dev->readonly)
|
||
|
dev->chip->options |= NAND_ROM;
|
||
|
|
||
|
r852_engine_enable(dev);
|
||
|
|
||
|
if (sm_register_device(mtd, dev->sm))
|
||
|
goto error1;
|
||
|
|
||
|
if (device_create_file(&mtd->dev, &dev_attr_media_type)) {
|
||
|
message("can't create media type sysfs attribute");
|
||
|
goto error3;
|
||
|
}
|
||
|
|
||
|
dev->card_registred = 1;
|
||
|
return 0;
|
||
|
error3:
|
||
|
nand_release(mtd);
|
||
|
error1:
|
||
|
/* Force card redetect */
|
||
|
dev->card_detected = 0;
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Unregister the card
|
||
|
*/
|
||
|
|
||
|
static void r852_unregister_nand_device(struct r852_device *dev)
|
||
|
{
|
||
|
struct mtd_info *mtd = nand_to_mtd(dev->chip);
|
||
|
|
||
|
if (!dev->card_registred)
|
||
|
return;
|
||
|
|
||
|
device_remove_file(&mtd->dev, &dev_attr_media_type);
|
||
|
nand_release(mtd);
|
||
|
r852_engine_disable(dev);
|
||
|
dev->card_registred = 0;
|
||
|
}
|
||
|
|
||
|
/* Card state updater */
|
||
|
static void r852_card_detect_work(struct work_struct *work)
|
||
|
{
|
||
|
struct r852_device *dev =
|
||
|
container_of(work, struct r852_device, card_detect_work.work);
|
||
|
|
||
|
r852_card_update_present(dev);
|
||
|
r852_update_card_detect(dev);
|
||
|
dev->card_unstable = 0;
|
||
|
|
||
|
/* False alarm */
|
||
|
if (dev->card_detected == dev->card_registred)
|
||
|
goto exit;
|
||
|
|
||
|
/* Read media properties */
|
||
|
r852_update_media_status(dev);
|
||
|
|
||
|
/* Register the card */
|
||
|
if (dev->card_detected)
|
||
|
r852_register_nand_device(dev);
|
||
|
else
|
||
|
r852_unregister_nand_device(dev);
|
||
|
exit:
|
||
|
r852_update_card_detect(dev);
|
||
|
}
|
||
|
|
||
|
/* Ack + disable IRQ generation */
|
||
|
static void r852_disable_irqs(struct r852_device *dev)
|
||
|
{
|
||
|
uint8_t reg;
|
||
|
reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
|
||
|
r852_write_reg(dev, R852_CARD_IRQ_ENABLE, reg & ~R852_CARD_IRQ_MASK);
|
||
|
|
||
|
reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
|
||
|
r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
|
||
|
reg & ~R852_DMA_IRQ_MASK);
|
||
|
|
||
|
r852_write_reg(dev, R852_CARD_IRQ_STA, R852_CARD_IRQ_MASK);
|
||
|
r852_write_reg_dword(dev, R852_DMA_IRQ_STA, R852_DMA_IRQ_MASK);
|
||
|
}
|
||
|
|
||
|
/* Interrupt handler */
|
||
|
static irqreturn_t r852_irq(int irq, void *data)
|
||
|
{
|
||
|
struct r852_device *dev = (struct r852_device *)data;
|
||
|
|
||
|
uint8_t card_status, dma_status;
|
||
|
unsigned long flags;
|
||
|
irqreturn_t ret = IRQ_NONE;
|
||
|
|
||
|
spin_lock_irqsave(&dev->irqlock, flags);
|
||
|
|
||
|
/* handle card detection interrupts first */
|
||
|
card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
|
||
|
r852_write_reg(dev, R852_CARD_IRQ_STA, card_status);
|
||
|
|
||
|
if (card_status & (R852_CARD_IRQ_INSERT|R852_CARD_IRQ_REMOVE)) {
|
||
|
|
||
|
ret = IRQ_HANDLED;
|
||
|
dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);
|
||
|
|
||
|
/* we shouldn't receive any interrupts if we wait for card
|
||
|
to settle */
|
||
|
WARN_ON(dev->card_unstable);
|
||
|
|
||
|
/* disable irqs while card is unstable */
|
||
|
/* this will timeout DMA if active, but better that garbage */
|
||
|
r852_disable_irqs(dev);
|
||
|
|
||
|
if (dev->card_unstable)
|
||
|
goto out;
|
||
|
|
||
|
/* let, card state to settle a bit, and then do the work */
|
||
|
dev->card_unstable = 1;
|
||
|
queue_delayed_work(dev->card_workqueue,
|
||
|
&dev->card_detect_work, msecs_to_jiffies(100));
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
|
||
|
/* Handle dma interrupts */
|
||
|
dma_status = r852_read_reg_dword(dev, R852_DMA_IRQ_STA);
|
||
|
r852_write_reg_dword(dev, R852_DMA_IRQ_STA, dma_status);
|
||
|
|
||
|
if (dma_status & R852_DMA_IRQ_MASK) {
|
||
|
|
||
|
ret = IRQ_HANDLED;
|
||
|
|
||
|
if (dma_status & R852_DMA_IRQ_ERROR) {
|
||
|
dbg("received dma error IRQ");
|
||
|
r852_dma_done(dev, -EIO);
|
||
|
complete(&dev->dma_done);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
/* received DMA interrupt out of nowhere? */
|
||
|
WARN_ON_ONCE(dev->dma_stage == 0);
|
||
|
|
||
|
if (dev->dma_stage == 0)
|
||
|
goto out;
|
||
|
|
||
|
/* done device access */
|
||
|
if (dev->dma_state == DMA_INTERNAL &&
|
||
|
(dma_status & R852_DMA_IRQ_INTERNAL)) {
|
||
|
|
||
|
dev->dma_state = DMA_MEMORY;
|
||
|
dev->dma_stage++;
|
||
|
}
|
||
|
|
||
|
/* done memory DMA */
|
||
|
if (dev->dma_state == DMA_MEMORY &&
|
||
|
(dma_status & R852_DMA_IRQ_MEMORY)) {
|
||
|
dev->dma_state = DMA_INTERNAL;
|
||
|
dev->dma_stage++;
|
||
|
}
|
||
|
|
||
|
/* Enable 2nd half of dma dance */
|
||
|
if (dev->dma_stage == 2)
|
||
|
r852_dma_enable(dev);
|
||
|
|
||
|
/* Operation done */
|
||
|
if (dev->dma_stage == 3) {
|
||
|
r852_dma_done(dev, 0);
|
||
|
complete(&dev->dma_done);
|
||
|
}
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
/* Handle unknown interrupts */
|
||
|
if (dma_status)
|
||
|
dbg("bad dma IRQ status = %x", dma_status);
|
||
|
|
||
|
if (card_status & ~R852_CARD_STA_CD)
|
||
|
dbg("strange card status = %x", card_status);
|
||
|
|
||
|
out:
|
||
|
spin_unlock_irqrestore(&dev->irqlock, flags);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
|
||
|
{
|
||
|
int error;
|
||
|
struct nand_chip *chip;
|
||
|
struct r852_device *dev;
|
||
|
|
||
|
/* pci initialization */
|
||
|
error = pci_enable_device(pci_dev);
|
||
|
|
||
|
if (error)
|
||
|
goto error1;
|
||
|
|
||
|
pci_set_master(pci_dev);
|
||
|
|
||
|
error = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
|
||
|
if (error)
|
||
|
goto error2;
|
||
|
|
||
|
error = pci_request_regions(pci_dev, DRV_NAME);
|
||
|
|
||
|
if (error)
|
||
|
goto error3;
|
||
|
|
||
|
error = -ENOMEM;
|
||
|
|
||
|
/* init nand chip, but register it only on card insert */
|
||
|
chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
|
||
|
|
||
|
if (!chip)
|
||
|
goto error4;
|
||
|
|
||
|
/* commands */
|
||
|
chip->cmd_ctrl = r852_cmdctl;
|
||
|
chip->waitfunc = r852_wait;
|
||
|
chip->dev_ready = r852_ready;
|
||
|
|
||
|
/* I/O */
|
||
|
chip->read_byte = r852_read_byte;
|
||
|
chip->read_buf = r852_read_buf;
|
||
|
chip->write_buf = r852_write_buf;
|
||
|
|
||
|
/* ecc */
|
||
|
chip->ecc.mode = NAND_ECC_HW_SYNDROME;
|
||
|
chip->ecc.size = R852_DMA_LEN;
|
||
|
chip->ecc.bytes = SM_OOB_SIZE;
|
||
|
chip->ecc.strength = 2;
|
||
|
chip->ecc.hwctl = r852_ecc_hwctl;
|
||
|
chip->ecc.calculate = r852_ecc_calculate;
|
||
|
chip->ecc.correct = r852_ecc_correct;
|
||
|
|
||
|
/* TODO: hack */
|
||
|
chip->ecc.read_oob = r852_read_oob;
|
||
|
|
||
|
/* init our device structure */
|
||
|
dev = kzalloc(sizeof(struct r852_device), GFP_KERNEL);
|
||
|
|
||
|
if (!dev)
|
||
|
goto error5;
|
||
|
|
||
|
nand_set_controller_data(chip, dev);
|
||
|
dev->chip = chip;
|
||
|
dev->pci_dev = pci_dev;
|
||
|
pci_set_drvdata(pci_dev, dev);
|
||
|
|
||
|
dev->bounce_buffer = pci_alloc_consistent(pci_dev, R852_DMA_LEN,
|
||
|
&dev->phys_bounce_buffer);
|
||
|
|
||
|
if (!dev->bounce_buffer)
|
||
|
goto error6;
|
||
|
|
||
|
|
||
|
error = -ENODEV;
|
||
|
dev->mmio = pci_ioremap_bar(pci_dev, 0);
|
||
|
|
||
|
if (!dev->mmio)
|
||
|
goto error7;
|
||
|
|
||
|
error = -ENOMEM;
|
||
|
dev->tmp_buffer = kzalloc(SM_SECTOR_SIZE, GFP_KERNEL);
|
||
|
|
||
|
if (!dev->tmp_buffer)
|
||
|
goto error8;
|
||
|
|
||
|
init_completion(&dev->dma_done);
|
||
|
|
||
|
dev->card_workqueue = create_freezable_workqueue(DRV_NAME);
|
||
|
|
||
|
if (!dev->card_workqueue)
|
||
|
goto error9;
|
||
|
|
||
|
INIT_DELAYED_WORK(&dev->card_detect_work, r852_card_detect_work);
|
||
|
|
||
|
/* shutdown everything - precation */
|
||
|
r852_engine_disable(dev);
|
||
|
r852_disable_irqs(dev);
|
||
|
|
||
|
r852_dma_test(dev);
|
||
|
|
||
|
dev->irq = pci_dev->irq;
|
||
|
spin_lock_init(&dev->irqlock);
|
||
|
|
||
|
dev->card_detected = 0;
|
||
|
r852_card_update_present(dev);
|
||
|
|
||
|
/*register irq handler*/
|
||
|
error = -ENODEV;
|
||
|
if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED,
|
||
|
DRV_NAME, dev))
|
||
|
goto error10;
|
||
|
|
||
|
/* kick initial present test */
|
||
|
queue_delayed_work(dev->card_workqueue,
|
||
|
&dev->card_detect_work, 0);
|
||
|
|
||
|
|
||
|
printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n");
|
||
|
return 0;
|
||
|
|
||
|
error10:
|
||
|
destroy_workqueue(dev->card_workqueue);
|
||
|
error9:
|
||
|
kfree(dev->tmp_buffer);
|
||
|
error8:
|
||
|
pci_iounmap(pci_dev, dev->mmio);
|
||
|
error7:
|
||
|
pci_free_consistent(pci_dev, R852_DMA_LEN,
|
||
|
dev->bounce_buffer, dev->phys_bounce_buffer);
|
||
|
error6:
|
||
|
kfree(dev);
|
||
|
error5:
|
||
|
kfree(chip);
|
||
|
error4:
|
||
|
pci_release_regions(pci_dev);
|
||
|
error3:
|
||
|
error2:
|
||
|
pci_disable_device(pci_dev);
|
||
|
error1:
|
||
|
return error;
|
||
|
}
|
||
|
|
||
|
static void r852_remove(struct pci_dev *pci_dev)
|
||
|
{
|
||
|
struct r852_device *dev = pci_get_drvdata(pci_dev);
|
||
|
|
||
|
/* Stop detect workqueue -
|
||
|
we are going to unregister the device anyway*/
|
||
|
cancel_delayed_work_sync(&dev->card_detect_work);
|
||
|
destroy_workqueue(dev->card_workqueue);
|
||
|
|
||
|
/* Unregister the device, this might make more IO */
|
||
|
r852_unregister_nand_device(dev);
|
||
|
|
||
|
/* Stop interrupts */
|
||
|
r852_disable_irqs(dev);
|
||
|
free_irq(dev->irq, dev);
|
||
|
|
||
|
/* Cleanup */
|
||
|
kfree(dev->tmp_buffer);
|
||
|
pci_iounmap(pci_dev, dev->mmio);
|
||
|
pci_free_consistent(pci_dev, R852_DMA_LEN,
|
||
|
dev->bounce_buffer, dev->phys_bounce_buffer);
|
||
|
|
||
|
kfree(dev->chip);
|
||
|
kfree(dev);
|
||
|
|
||
|
/* Shutdown the PCI device */
|
||
|
pci_release_regions(pci_dev);
|
||
|
pci_disable_device(pci_dev);
|
||
|
}
|
||
|
|
||
|
static void r852_shutdown(struct pci_dev *pci_dev)
|
||
|
{
|
||
|
struct r852_device *dev = pci_get_drvdata(pci_dev);
|
||
|
|
||
|
cancel_delayed_work_sync(&dev->card_detect_work);
|
||
|
r852_disable_irqs(dev);
|
||
|
synchronize_irq(dev->irq);
|
||
|
pci_disable_device(pci_dev);
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_PM_SLEEP
|
||
|
static int r852_suspend(struct device *device)
|
||
|
{
|
||
|
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
|
||
|
|
||
|
if (dev->ctlreg & R852_CTL_CARDENABLE)
|
||
|
return -EBUSY;
|
||
|
|
||
|
/* First make sure the detect work is gone */
|
||
|
cancel_delayed_work_sync(&dev->card_detect_work);
|
||
|
|
||
|
/* Turn off the interrupts and stop the device */
|
||
|
r852_disable_irqs(dev);
|
||
|
r852_engine_disable(dev);
|
||
|
|
||
|
/* If card was pulled off just during the suspend, which is very
|
||
|
unlikely, we will remove it on resume, it too late now
|
||
|
anyway... */
|
||
|
dev->card_unstable = 0;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int r852_resume(struct device *device)
|
||
|
{
|
||
|
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
|
||
|
struct mtd_info *mtd = nand_to_mtd(dev->chip);
|
||
|
|
||
|
r852_disable_irqs(dev);
|
||
|
r852_card_update_present(dev);
|
||
|
r852_engine_disable(dev);
|
||
|
|
||
|
|
||
|
/* If card status changed, just do the work */
|
||
|
if (dev->card_detected != dev->card_registred) {
|
||
|
dbg("card was %s during low power state",
|
||
|
dev->card_detected ? "added" : "removed");
|
||
|
|
||
|
queue_delayed_work(dev->card_workqueue,
|
||
|
&dev->card_detect_work, msecs_to_jiffies(1000));
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Otherwise, initialize the card */
|
||
|
if (dev->card_registred) {
|
||
|
r852_engine_enable(dev);
|
||
|
dev->chip->select_chip(mtd, 0);
|
||
|
dev->chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
|
||
|
dev->chip->select_chip(mtd, -1);
|
||
|
}
|
||
|
|
||
|
/* Program card detection IRQ */
|
||
|
r852_update_card_detect(dev);
|
||
|
return 0;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
static const struct pci_device_id r852_pci_id_tbl[] = {
|
||
|
|
||
|
{ PCI_VDEVICE(RICOH, 0x0852), },
|
||
|
{ },
|
||
|
};
|
||
|
|
||
|
MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
|
||
|
|
||
|
static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
|
||
|
|
||
|
static struct pci_driver r852_pci_driver = {
|
||
|
.name = DRV_NAME,
|
||
|
.id_table = r852_pci_id_tbl,
|
||
|
.probe = r852_probe,
|
||
|
.remove = r852_remove,
|
||
|
.shutdown = r852_shutdown,
|
||
|
.driver.pm = &r852_pm_ops,
|
||
|
};
|
||
|
|
||
|
module_pci_driver(r852_pci_driver);
|
||
|
|
||
|
MODULE_LICENSE("GPL");
|
||
|
MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
|
||
|
MODULE_DESCRIPTION("Ricoh 85xx xD/smartmedia card reader driver");
|