ubuntu-linux-kernel/drivers/gpu/drm/omapdrm/dss/sdi.c

391 lines
8.2 KiB
C
Raw Normal View History

2024-04-01 15:06:58 +00:00
/*
* linux/drivers/video/omap2/dss/sdi.c
*
* Copyright (C) 2009 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define DSS_SUBSYS_NAME "SDI"
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <linux/of.h>
#include "omapdss.h"
#include "dss.h"
static struct {
struct platform_device *pdev;
bool update_enabled;
struct regulator *vdds_sdi_reg;
struct dss_lcd_mgr_config mgr_config;
struct videomode vm;
int datapairs;
struct omap_dss_device output;
bool port_initialized;
} sdi;
struct sdi_clk_calc_ctx {
unsigned long pck_min, pck_max;
unsigned long fck;
struct dispc_clock_info dispc_cinfo;
};
static bool dpi_calc_dispc_cb(int lckd, int pckd, unsigned long lck,
unsigned long pck, void *data)
{
struct sdi_clk_calc_ctx *ctx = data;
ctx->dispc_cinfo.lck_div = lckd;
ctx->dispc_cinfo.pck_div = pckd;
ctx->dispc_cinfo.lck = lck;
ctx->dispc_cinfo.pck = pck;
return true;
}
static bool dpi_calc_dss_cb(unsigned long fck, void *data)
{
struct sdi_clk_calc_ctx *ctx = data;
ctx->fck = fck;
return dispc_div_calc(fck, ctx->pck_min, ctx->pck_max,
dpi_calc_dispc_cb, ctx);
}
static int sdi_calc_clock_div(unsigned long pclk,
unsigned long *fck,
struct dispc_clock_info *dispc_cinfo)
{
int i;
struct sdi_clk_calc_ctx ctx;
/*
* DSS fclk gives us very few possibilities, so finding a good pixel
* clock may not be possible. We try multiple times to find the clock,
* each time widening the pixel clock range we look for, up to
* +/- 1MHz.
*/
for (i = 0; i < 10; ++i) {
bool ok;
memset(&ctx, 0, sizeof(ctx));
if (pclk > 1000 * i * i * i)
ctx.pck_min = max(pclk - 1000 * i * i * i, 0lu);
else
ctx.pck_min = 0;
ctx.pck_max = pclk + 1000 * i * i * i;
ok = dss_div_calc(pclk, ctx.pck_min, dpi_calc_dss_cb, &ctx);
if (ok) {
*fck = ctx.fck;
*dispc_cinfo = ctx.dispc_cinfo;
return 0;
}
}
return -EINVAL;
}
static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
{
enum omap_channel channel = dssdev->dispc_channel;
sdi.mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
sdi.mgr_config.stallmode = false;
sdi.mgr_config.fifohandcheck = false;
sdi.mgr_config.video_port_width = 24;
sdi.mgr_config.lcden_sig_polarity = 1;
dss_mgr_set_lcd_config(channel, &sdi.mgr_config);
}
static int sdi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out = &sdi.output;
enum omap_channel channel = dssdev->dispc_channel;
struct videomode *vm = &sdi.vm;
unsigned long fck;
struct dispc_clock_info dispc_cinfo;
unsigned long pck;
int r;
if (!out->dispc_channel_connected) {
DSSERR("failed to enable display: no output/manager\n");
return -ENODEV;
}
r = regulator_enable(sdi.vdds_sdi_reg);
if (r)
goto err_reg_enable;
r = dispc_runtime_get();
if (r)
goto err_get_dispc;
/* 15.5.9.1.2 */
vm->flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE | DISPLAY_FLAGS_SYNC_POSEDGE;
r = sdi_calc_clock_div(vm->pixelclock, &fck, &dispc_cinfo);
if (r)
goto err_calc_clock_div;
sdi.mgr_config.clock_info = dispc_cinfo;
pck = fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div;
if (pck != vm->pixelclock) {
DSSWARN("Could not find exact pixel clock. Requested %lu Hz, got %lu Hz\n",
vm->pixelclock, pck);
vm->pixelclock = pck;
}
dss_mgr_set_timings(channel, vm);
r = dss_set_fck_rate(fck);
if (r)
goto err_set_dss_clock_div;
sdi_config_lcd_manager(dssdev);
/*
* LCLK and PCLK divisors are located in shadow registers, and we
* normally write them to DISPC registers when enabling the output.
* However, SDI uses pck-free as source clock for its PLL, and pck-free
* is affected by the divisors. And as we need the PLL before enabling
* the output, we need to write the divisors early.
*
* It seems just writing to the DISPC register is enough, and we don't
* need to care about the shadow register mechanism for pck-free. The
* exact reason for this is unknown.
*/
dispc_mgr_set_clock_div(channel, &sdi.mgr_config.clock_info);
dss_sdi_init(sdi.datapairs);
r = dss_sdi_enable();
if (r)
goto err_sdi_enable;
mdelay(2);
r = dss_mgr_enable(channel);
if (r)
goto err_mgr_enable;
return 0;
err_mgr_enable:
dss_sdi_disable();
err_sdi_enable:
err_set_dss_clock_div:
err_calc_clock_div:
dispc_runtime_put();
err_get_dispc:
regulator_disable(sdi.vdds_sdi_reg);
err_reg_enable:
return r;
}
static void sdi_display_disable(struct omap_dss_device *dssdev)
{
enum omap_channel channel = dssdev->dispc_channel;
dss_mgr_disable(channel);
dss_sdi_disable();
dispc_runtime_put();
regulator_disable(sdi.vdds_sdi_reg);
}
static void sdi_set_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
sdi.vm = *vm;
}
static void sdi_get_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
*vm = sdi.vm;
}
static int sdi_check_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
enum omap_channel channel = dssdev->dispc_channel;
if (!dispc_mgr_timings_ok(channel, vm))
return -EINVAL;
if (vm->pixelclock == 0)
return -EINVAL;
return 0;
}
static int sdi_init_regulator(void)
{
struct regulator *vdds_sdi;
if (sdi.vdds_sdi_reg)
return 0;
vdds_sdi = devm_regulator_get(&sdi.pdev->dev, "vdds_sdi");
if (IS_ERR(vdds_sdi)) {
if (PTR_ERR(vdds_sdi) != -EPROBE_DEFER)
DSSERR("can't get VDDS_SDI regulator\n");
return PTR_ERR(vdds_sdi);
}
sdi.vdds_sdi_reg = vdds_sdi;
return 0;
}
static int sdi_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
enum omap_channel channel = dssdev->dispc_channel;
int r;
r = sdi_init_regulator();
if (r)
return r;
r = dss_mgr_connect(channel, dssdev);
if (r)
return r;
r = omapdss_output_set_device(dssdev, dst);
if (r) {
DSSERR("failed to connect output to new device: %s\n",
dst->name);
dss_mgr_disconnect(channel, dssdev);
return r;
}
return 0;
}
static void sdi_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
enum omap_channel channel = dssdev->dispc_channel;
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->dst)
return;
omapdss_output_unset_device(dssdev);
dss_mgr_disconnect(channel, dssdev);
}
static const struct omapdss_sdi_ops sdi_ops = {
.connect = sdi_connect,
.disconnect = sdi_disconnect,
.enable = sdi_display_enable,
.disable = sdi_display_disable,
.check_timings = sdi_check_timings,
.set_timings = sdi_set_timings,
.get_timings = sdi_get_timings,
};
static void sdi_init_output(struct platform_device *pdev)
{
struct omap_dss_device *out = &sdi.output;
out->dev = &pdev->dev;
out->id = OMAP_DSS_OUTPUT_SDI;
out->output_type = OMAP_DISPLAY_TYPE_SDI;
out->name = "sdi.0";
out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
/* We have SDI only on OMAP3, where it's on port 1 */
out->port_num = 1;
out->ops.sdi = &sdi_ops;
out->owner = THIS_MODULE;
omapdss_register_output(out);
}
static void sdi_uninit_output(struct platform_device *pdev)
{
struct omap_dss_device *out = &sdi.output;
omapdss_unregister_output(out);
}
int sdi_init_port(struct platform_device *pdev, struct device_node *port)
{
struct device_node *ep;
u32 datapairs;
int r;
ep = of_get_next_child(port, NULL);
if (!ep)
return 0;
r = of_property_read_u32(ep, "datapairs", &datapairs);
if (r) {
DSSERR("failed to parse datapairs\n");
goto err_datapairs;
}
sdi.datapairs = datapairs;
of_node_put(ep);
sdi.pdev = pdev;
sdi_init_output(pdev);
sdi.port_initialized = true;
return 0;
err_datapairs:
of_node_put(ep);
return r;
}
void sdi_uninit_port(struct device_node *port)
{
if (!sdi.port_initialized)
return;
sdi_uninit_output(sdi.pdev);
}