766 lines
19 KiB
Plaintext
766 lines
19 KiB
Plaintext
|
/*
|
||
|
* BSD LICENSE
|
||
|
*
|
||
|
* Copyright (c) 2015 Broadcom. All rights reserved.
|
||
|
*
|
||
|
* Redistribution and use in source and binary forms, with or without
|
||
|
* modification, are permitted provided that the following conditions
|
||
|
* are met:
|
||
|
*
|
||
|
* * Redistributions of source code must retain the above copyright
|
||
|
* notice, this list of conditions and the following disclaimer.
|
||
|
* * Redistributions in binary form must reproduce the above copyright
|
||
|
* notice, this list of conditions and the following disclaimer in
|
||
|
* the documentation and/or other materials provided with the
|
||
|
* distribution.
|
||
|
* * Neither the name of Broadcom Corporation nor the names of its
|
||
|
* contributors may be used to endorse or promote products derived
|
||
|
* from this software without specific prior written permission.
|
||
|
*
|
||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
*/
|
||
|
|
||
|
/memreserve/ 0x81000000 0x00200000;
|
||
|
|
||
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
#include <dt-bindings/clock/bcm-ns2.h>
|
||
|
|
||
|
/ {
|
||
|
compatible = "brcm,ns2";
|
||
|
interrupt-parent = <&gic>;
|
||
|
#address-cells = <2>;
|
||
|
#size-cells = <2>;
|
||
|
|
||
|
cpus {
|
||
|
#address-cells = <2>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
A57_0: cpu@0 {
|
||
|
device_type = "cpu";
|
||
|
compatible = "arm,cortex-a57", "arm,armv8";
|
||
|
reg = <0 0>;
|
||
|
enable-method = "psci";
|
||
|
next-level-cache = <&CLUSTER0_L2>;
|
||
|
};
|
||
|
|
||
|
A57_1: cpu@1 {
|
||
|
device_type = "cpu";
|
||
|
compatible = "arm,cortex-a57", "arm,armv8";
|
||
|
reg = <0 1>;
|
||
|
enable-method = "psci";
|
||
|
next-level-cache = <&CLUSTER0_L2>;
|
||
|
};
|
||
|
|
||
|
A57_2: cpu@2 {
|
||
|
device_type = "cpu";
|
||
|
compatible = "arm,cortex-a57", "arm,armv8";
|
||
|
reg = <0 2>;
|
||
|
enable-method = "psci";
|
||
|
next-level-cache = <&CLUSTER0_L2>;
|
||
|
};
|
||
|
|
||
|
A57_3: cpu@3 {
|
||
|
device_type = "cpu";
|
||
|
compatible = "arm,cortex-a57", "arm,armv8";
|
||
|
reg = <0 3>;
|
||
|
enable-method = "psci";
|
||
|
next-level-cache = <&CLUSTER0_L2>;
|
||
|
};
|
||
|
|
||
|
CLUSTER0_L2: l2-cache@0 {
|
||
|
compatible = "cache";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
psci {
|
||
|
compatible = "arm,psci-1.0";
|
||
|
method = "smc";
|
||
|
};
|
||
|
|
||
|
timer {
|
||
|
compatible = "arm,armv8-timer";
|
||
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
|
||
|
IRQ_TYPE_LEVEL_LOW)>,
|
||
|
<GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
|
||
|
IRQ_TYPE_LEVEL_LOW)>,
|
||
|
<GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
|
||
|
IRQ_TYPE_LEVEL_LOW)>,
|
||
|
<GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
|
||
|
IRQ_TYPE_LEVEL_LOW)>;
|
||
|
};
|
||
|
|
||
|
pmu {
|
||
|
compatible = "arm,armv8-pmuv3";
|
||
|
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-affinity = <&A57_0>,
|
||
|
<&A57_1>,
|
||
|
<&A57_2>,
|
||
|
<&A57_3>;
|
||
|
};
|
||
|
|
||
|
pcie0: pcie@20020000 {
|
||
|
compatible = "brcm,iproc-pcie";
|
||
|
reg = <0 0x20020000 0 0x1000>;
|
||
|
dma-coherent;
|
||
|
|
||
|
#interrupt-cells = <1>;
|
||
|
interrupt-map-mask = <0 0 0 0>;
|
||
|
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>;
|
||
|
|
||
|
linux,pci-domain = <0>;
|
||
|
|
||
|
bus-range = <0x00 0xff>;
|
||
|
|
||
|
#address-cells = <3>;
|
||
|
#size-cells = <2>;
|
||
|
device_type = "pci";
|
||
|
ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
|
||
|
|
||
|
brcm,pcie-ob;
|
||
|
brcm,pcie-ob-oarr-size;
|
||
|
brcm,pcie-ob-axi-offset = <0x00000000>;
|
||
|
brcm,pcie-ob-window-size = <256>;
|
||
|
|
||
|
status = "disabled";
|
||
|
|
||
|
phys = <&pci_phy0>;
|
||
|
phy-names = "pcie-phy";
|
||
|
|
||
|
msi-parent = <&v2m0>;
|
||
|
};
|
||
|
|
||
|
pcie4: pcie@50020000 {
|
||
|
compatible = "brcm,iproc-pcie";
|
||
|
reg = <0 0x50020000 0 0x1000>;
|
||
|
dma-coherent;
|
||
|
|
||
|
#interrupt-cells = <1>;
|
||
|
interrupt-map-mask = <0 0 0 0>;
|
||
|
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>;
|
||
|
|
||
|
linux,pci-domain = <4>;
|
||
|
|
||
|
bus-range = <0x00 0xff>;
|
||
|
|
||
|
#address-cells = <3>;
|
||
|
#size-cells = <2>;
|
||
|
device_type = "pci";
|
||
|
ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
|
||
|
|
||
|
brcm,pcie-ob;
|
||
|
brcm,pcie-ob-oarr-size;
|
||
|
brcm,pcie-ob-axi-offset = <0x30000000>;
|
||
|
brcm,pcie-ob-window-size = <256>;
|
||
|
|
||
|
status = "disabled";
|
||
|
|
||
|
phys = <&pci_phy1>;
|
||
|
phy-names = "pcie-phy";
|
||
|
|
||
|
msi-parent = <&v2m0>;
|
||
|
};
|
||
|
|
||
|
pcie8: pcie@60c00000 {
|
||
|
compatible = "brcm,iproc-pcie-paxc";
|
||
|
reg = <0 0x60c00000 0 0x1000>;
|
||
|
dma-coherent;
|
||
|
linux,pci-domain = <8>;
|
||
|
|
||
|
bus-range = <0x0 0x1>;
|
||
|
|
||
|
#address-cells = <3>;
|
||
|
#size-cells = <2>;
|
||
|
device_type = "pci";
|
||
|
ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>;
|
||
|
|
||
|
status = "disabled";
|
||
|
|
||
|
msi-parent = <&v2m0>;
|
||
|
};
|
||
|
|
||
|
soc: soc {
|
||
|
compatible = "simple-bus";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges = <0 0 0 0xffffffff>;
|
||
|
|
||
|
#include "ns2-clock.dtsi"
|
||
|
|
||
|
enet: ethernet@61000000 {
|
||
|
compatible = "brcm,ns2-amac";
|
||
|
reg = <0x61000000 0x1000>,
|
||
|
<0x61090000 0x1000>,
|
||
|
<0x61030000 0x100>;
|
||
|
reg-names = "amac_base", "idm_base", "nicpm_base";
|
||
|
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
dma-coherent;
|
||
|
phy-handle = <&gphy0>;
|
||
|
phy-mode = "rgmii";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
pdc0: iproc-pdc0@612c0000 {
|
||
|
compatible = "brcm,iproc-pdc-mbox";
|
||
|
reg = <0x612c0000 0x445>; /* PDC FS0 regs */
|
||
|
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#mbox-cells = <1>;
|
||
|
dma-coherent;
|
||
|
brcm,rx-status-len = <32>;
|
||
|
brcm,use-bcm-hdr;
|
||
|
};
|
||
|
|
||
|
crypto0: crypto@612d0000 {
|
||
|
compatible = "brcm,spum-crypto";
|
||
|
reg = <0x612d0000 0x900>;
|
||
|
mboxes = <&pdc0 0>;
|
||
|
};
|
||
|
|
||
|
pdc1: iproc-pdc1@612e0000 {
|
||
|
compatible = "brcm,iproc-pdc-mbox";
|
||
|
reg = <0x612e0000 0x445>; /* PDC FS1 regs */
|
||
|
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#mbox-cells = <1>;
|
||
|
dma-coherent;
|
||
|
brcm,rx-status-len = <32>;
|
||
|
brcm,use-bcm-hdr;
|
||
|
};
|
||
|
|
||
|
crypto1: crypto@612f0000 {
|
||
|
compatible = "brcm,spum-crypto";
|
||
|
reg = <0x612f0000 0x900>;
|
||
|
mboxes = <&pdc1 0>;
|
||
|
};
|
||
|
|
||
|
pdc2: iproc-pdc2@61300000 {
|
||
|
compatible = "brcm,iproc-pdc-mbox";
|
||
|
reg = <0x61300000 0x445>; /* PDC FS2 regs */
|
||
|
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#mbox-cells = <1>;
|
||
|
dma-coherent;
|
||
|
brcm,rx-status-len = <32>;
|
||
|
brcm,use-bcm-hdr;
|
||
|
};
|
||
|
|
||
|
crypto2: crypto@61310000 {
|
||
|
compatible = "brcm,spum-crypto";
|
||
|
reg = <0x61310000 0x900>;
|
||
|
mboxes = <&pdc2 0>;
|
||
|
};
|
||
|
|
||
|
pdc3: iproc-pdc3@61320000 {
|
||
|
compatible = "brcm,iproc-pdc-mbox";
|
||
|
reg = <0x61320000 0x445>; /* PDC FS3 regs */
|
||
|
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#mbox-cells = <1>;
|
||
|
dma-coherent;
|
||
|
brcm,rx-status-len = <32>;
|
||
|
brcm,use-bcm-hdr;
|
||
|
};
|
||
|
|
||
|
crypto3: crypto@61330000 {
|
||
|
compatible = "brcm,spum-crypto";
|
||
|
reg = <0x61330000 0x900>;
|
||
|
mboxes = <&pdc3 0>;
|
||
|
};
|
||
|
|
||
|
dma0: dma@61360000 {
|
||
|
compatible = "arm,pl330", "arm,primecell";
|
||
|
reg = <0x61360000 0x1000>;
|
||
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#dma-cells = <1>;
|
||
|
#dma-channels = <8>;
|
||
|
#dma-requests = <32>;
|
||
|
clocks = <&iprocslow>;
|
||
|
clock-names = "apb_pclk";
|
||
|
};
|
||
|
|
||
|
smmu: mmu@64000000 {
|
||
|
compatible = "arm,mmu-500";
|
||
|
reg = <0x64000000 0x40000>;
|
||
|
#global-interrupts = <2>;
|
||
|
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#iommu-cells = <1>;
|
||
|
};
|
||
|
|
||
|
pinctrl: pinctrl@6501d130 {
|
||
|
compatible = "brcm,ns2-pinmux";
|
||
|
reg = <0x6501d130 0x08>,
|
||
|
<0x660a0028 0x04>,
|
||
|
<0x660009b0 0x40>;
|
||
|
};
|
||
|
|
||
|
gpio_aon: gpio@65024800 {
|
||
|
compatible = "brcm,iproc-gpio";
|
||
|
reg = <0x65024800 0x50>,
|
||
|
<0x65024008 0x18>;
|
||
|
ngpios = <6>;
|
||
|
#gpio-cells = <2>;
|
||
|
gpio-controller;
|
||
|
};
|
||
|
|
||
|
gic: interrupt-controller@65210000 {
|
||
|
compatible = "arm,gic-400";
|
||
|
#interrupt-cells = <3>;
|
||
|
interrupt-controller;
|
||
|
reg = <0x65210000 0x1000>,
|
||
|
<0x65220000 0x1000>,
|
||
|
<0x65240000 0x2000>,
|
||
|
<0x65260000 0x1000>;
|
||
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
|
||
|
IRQ_TYPE_LEVEL_HIGH)>;
|
||
|
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges = <0 0x652e0000 0x80000>;
|
||
|
|
||
|
v2m0: v2m@0 {
|
||
|
compatible = "arm,gic-v2m-frame";
|
||
|
interrupt-parent = <&gic>;
|
||
|
msi-controller;
|
||
|
reg = <0x00000 0x1000>;
|
||
|
arm,msi-base-spi = <72>;
|
||
|
arm,msi-num-spis = <16>;
|
||
|
};
|
||
|
|
||
|
v2m1: v2m@10000 {
|
||
|
compatible = "arm,gic-v2m-frame";
|
||
|
interrupt-parent = <&gic>;
|
||
|
msi-controller;
|
||
|
reg = <0x10000 0x1000>;
|
||
|
arm,msi-base-spi = <88>;
|
||
|
arm,msi-num-spis = <16>;
|
||
|
};
|
||
|
|
||
|
v2m2: v2m@20000 {
|
||
|
compatible = "arm,gic-v2m-frame";
|
||
|
interrupt-parent = <&gic>;
|
||
|
msi-controller;
|
||
|
reg = <0x20000 0x1000>;
|
||
|
arm,msi-base-spi = <104>;
|
||
|
arm,msi-num-spis = <16>;
|
||
|
};
|
||
|
|
||
|
v2m3: v2m@30000 {
|
||
|
compatible = "arm,gic-v2m-frame";
|
||
|
interrupt-parent = <&gic>;
|
||
|
msi-controller;
|
||
|
reg = <0x30000 0x1000>;
|
||
|
arm,msi-base-spi = <120>;
|
||
|
arm,msi-num-spis = <16>;
|
||
|
};
|
||
|
|
||
|
v2m4: v2m@40000 {
|
||
|
compatible = "arm,gic-v2m-frame";
|
||
|
interrupt-parent = <&gic>;
|
||
|
msi-controller;
|
||
|
reg = <0x40000 0x1000>;
|
||
|
arm,msi-base-spi = <136>;
|
||
|
arm,msi-num-spis = <16>;
|
||
|
};
|
||
|
|
||
|
v2m5: v2m@50000 {
|
||
|
compatible = "arm,gic-v2m-frame";
|
||
|
interrupt-parent = <&gic>;
|
||
|
msi-controller;
|
||
|
reg = <0x50000 0x1000>;
|
||
|
arm,msi-base-spi = <152>;
|
||
|
arm,msi-num-spis = <16>;
|
||
|
};
|
||
|
|
||
|
v2m6: v2m@60000 {
|
||
|
compatible = "arm,gic-v2m-frame";
|
||
|
interrupt-parent = <&gic>;
|
||
|
msi-controller;
|
||
|
reg = <0x60000 0x1000>;
|
||
|
arm,msi-base-spi = <168>;
|
||
|
arm,msi-num-spis = <16>;
|
||
|
};
|
||
|
|
||
|
v2m7: v2m@70000 {
|
||
|
compatible = "arm,gic-v2m-frame";
|
||
|
interrupt-parent = <&gic>;
|
||
|
msi-controller;
|
||
|
reg = <0x70000 0x1000>;
|
||
|
arm,msi-base-spi = <184>;
|
||
|
arm,msi-num-spis = <16>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
cci@65590000 {
|
||
|
compatible = "arm,cci-400";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
reg = <0x65590000 0x1000>;
|
||
|
ranges = <0 0x65590000 0x10000>;
|
||
|
|
||
|
pmu@9000 {
|
||
|
compatible = "arm,cci-400-pmu,r1",
|
||
|
"arm,cci-400-pmu";
|
||
|
reg = <0x9000 0x4000>;
|
||
|
interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
usbdrd_phy: phy@66000960 {
|
||
|
#phy-cells = <0>;
|
||
|
compatible = "brcm,ns2-drd-phy";
|
||
|
reg = <0x66000960 0x24>,
|
||
|
<0x67012800 0x4>,
|
||
|
<0x6501d148 0x4>,
|
||
|
<0x664d0700 0x4>;
|
||
|
reg-names = "icfg", "rst-ctrl",
|
||
|
"crmu-ctrl", "usb2-strap";
|
||
|
id-gpios = <&gpio_g 30 0>;
|
||
|
vbus-gpios = <&gpio_g 31 0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
pwm: pwm@66010000 {
|
||
|
compatible = "brcm,iproc-pwm";
|
||
|
reg = <0x66010000 0x28>;
|
||
|
clocks = <&osc>;
|
||
|
#pwm-cells = <3>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
mdio_mux_iproc: mdio-mux@6602023c {
|
||
|
compatible = "brcm,mdio-mux-iproc";
|
||
|
reg = <0x6602023c 0x14>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
mdio@0 {
|
||
|
reg = <0x0>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
pci_phy0: pci-phy@0 {
|
||
|
compatible = "brcm,ns2-pcie-phy";
|
||
|
reg = <0x0>;
|
||
|
#phy-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
mdio@7 {
|
||
|
reg = <0x7>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
pci_phy1: pci-phy@0 {
|
||
|
compatible = "brcm,ns2-pcie-phy";
|
||
|
reg = <0x0>;
|
||
|
#phy-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
mdio@10 {
|
||
|
reg = <0x10>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
timer0: timer@66030000 {
|
||
|
compatible = "arm,sp804", "arm,primecell";
|
||
|
reg = <0x66030000 0x1000>;
|
||
|
interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>,
|
||
|
<&iprocslow>,
|
||
|
<&iprocslow>;
|
||
|
clock-names = "timer1", "timer2", "apb_pclk";
|
||
|
};
|
||
|
|
||
|
timer1: timer@66040000 {
|
||
|
compatible = "arm,sp804", "arm,primecell";
|
||
|
reg = <0x66040000 0x1000>;
|
||
|
interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>,
|
||
|
<&iprocslow>,
|
||
|
<&iprocslow>;
|
||
|
clock-names = "timer1", "timer2", "apb_pclk";
|
||
|
};
|
||
|
|
||
|
timer2: timer@66050000 {
|
||
|
compatible = "arm,sp804", "arm,primecell";
|
||
|
reg = <0x66050000 0x1000>;
|
||
|
interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>,
|
||
|
<&iprocslow>,
|
||
|
<&iprocslow>;
|
||
|
clock-names = "timer1", "timer2", "apb_pclk";
|
||
|
};
|
||
|
|
||
|
timer3: timer@66060000 {
|
||
|
compatible = "arm,sp804", "arm,primecell";
|
||
|
reg = <0x66060000 0x1000>;
|
||
|
interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>,
|
||
|
<&iprocslow>,
|
||
|
<&iprocslow>;
|
||
|
clock-names = "timer1", "timer2", "apb_pclk";
|
||
|
};
|
||
|
|
||
|
i2c0: i2c@66080000 {
|
||
|
compatible = "brcm,iproc-i2c";
|
||
|
reg = <0x66080000 0x100>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
|
||
|
clock-frequency = <100000>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
wdt0: watchdog@66090000 {
|
||
|
compatible = "arm,sp805", "arm,primecell";
|
||
|
reg = <0x66090000 0x1000>;
|
||
|
interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>, <&iprocslow>;
|
||
|
clock-names = "wdogclk", "apb_pclk";
|
||
|
};
|
||
|
|
||
|
gpio_g: gpio@660a0000 {
|
||
|
compatible = "brcm,iproc-gpio";
|
||
|
reg = <0x660a0000 0x50>;
|
||
|
ngpios = <32>;
|
||
|
#gpio-cells = <2>;
|
||
|
gpio-controller;
|
||
|
interrupt-controller;
|
||
|
interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
};
|
||
|
|
||
|
i2c1: i2c@660b0000 {
|
||
|
compatible = "brcm,iproc-i2c";
|
||
|
reg = <0x660b0000 0x100>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
|
||
|
clock-frequency = <100000>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
uart0: serial@66100000 {
|
||
|
compatible = "snps,dw-apb-uart";
|
||
|
reg = <0x66100000 0x100>;
|
||
|
interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>;
|
||
|
reg-shift = <2>;
|
||
|
reg-io-width = <4>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
uart1: serial@66110000 {
|
||
|
compatible = "snps,dw-apb-uart";
|
||
|
reg = <0x66110000 0x100>;
|
||
|
interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>;
|
||
|
reg-shift = <2>;
|
||
|
reg-io-width = <4>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
uart2: serial@66120000 {
|
||
|
compatible = "snps,dw-apb-uart";
|
||
|
reg = <0x66120000 0x100>;
|
||
|
interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>;
|
||
|
reg-shift = <2>;
|
||
|
reg-io-width = <4>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
uart3: serial@66130000 {
|
||
|
compatible = "snps,dw-apb-uart";
|
||
|
reg = <0x66130000 0x100>;
|
||
|
interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
reg-shift = <2>;
|
||
|
reg-io-width = <4>;
|
||
|
clocks = <&osc>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
ssp0: ssp@66180000 {
|
||
|
compatible = "arm,pl022", "arm,primecell";
|
||
|
reg = <0x66180000 0x1000>;
|
||
|
interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>, <&iprocslow>;
|
||
|
clock-names = "spiclk", "apb_pclk";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
ssp1: ssp@66190000 {
|
||
|
compatible = "arm,pl022", "arm,primecell";
|
||
|
reg = <0x66190000 0x1000>;
|
||
|
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&iprocslow>, <&iprocslow>;
|
||
|
clock-names = "spiclk", "apb_pclk";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
hwrng: hwrng@66220000 {
|
||
|
compatible = "brcm,iproc-rng200";
|
||
|
reg = <0x66220000 0x28>;
|
||
|
};
|
||
|
|
||
|
sata_phy: sata_phy@663f0100 {
|
||
|
compatible = "brcm,iproc-ns2-sata-phy";
|
||
|
reg = <0x663f0100 0x1f00>,
|
||
|
<0x663f004c 0x10>;
|
||
|
reg-names = "phy", "phy-ctrl";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
sata_phy0: sata-phy@0 {
|
||
|
reg = <0>;
|
||
|
#phy-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
sata_phy1: sata-phy@1 {
|
||
|
reg = <1>;
|
||
|
#phy-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
sata: ahci@663f2000 {
|
||
|
compatible = "brcm,iproc-ahci", "generic-ahci";
|
||
|
reg = <0x663f2000 0x1000>;
|
||
|
dma-coherent;
|
||
|
reg-names = "ahci";
|
||
|
interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
|
||
|
sata0: sata-port@0 {
|
||
|
reg = <0>;
|
||
|
phys = <&sata_phy0>;
|
||
|
phy-names = "sata-phy";
|
||
|
};
|
||
|
|
||
|
sata1: sata-port@1 {
|
||
|
reg = <1>;
|
||
|
phys = <&sata_phy1>;
|
||
|
phy-names = "sata-phy";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
sdio0: sdhci@66420000 {
|
||
|
compatible = "brcm,sdhci-iproc-cygnus";
|
||
|
reg = <0x66420000 0x100>;
|
||
|
interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
dma-coherent;
|
||
|
bus-width = <8>;
|
||
|
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
sdio1: sdhci@66430000 {
|
||
|
compatible = "brcm,sdhci-iproc-cygnus";
|
||
|
reg = <0x66430000 0x100>;
|
||
|
interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
dma-coherent;
|
||
|
bus-width = <8>;
|
||
|
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
nand: nand@66460000 {
|
||
|
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
|
||
|
reg = <0x66460000 0x600>,
|
||
|
<0x67015408 0x600>,
|
||
|
<0x66460f00 0x20>;
|
||
|
reg-names = "nand", "iproc-idm", "iproc-ext";
|
||
|
interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
brcm,nand-has-wp;
|
||
|
};
|
||
|
|
||
|
qspi: spi@66470200 {
|
||
|
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
|
||
|
reg = <0x66470200 0x184>,
|
||
|
<0x66470000 0x124>,
|
||
|
<0x67017408 0x004>,
|
||
|
<0x664703a0 0x01c>;
|
||
|
reg-names = "mspi", "bspi", "intr_regs",
|
||
|
"intr_status_reg";
|
||
|
interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-names = "spi_l1_intr";
|
||
|
clocks = <&iprocmed>;
|
||
|
clock-names = "iprocmed";
|
||
|
num-cs = <2>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
};
|
||
|
|
||
|
};
|
||
|
};
|