1284 lines
31 KiB
Plaintext
1284 lines
31 KiB
Plaintext
|
/*
|
||
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
|
* published by the Free Software Foundation.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
|
#include <dt-bindings/pinctrl/omap.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
compatible = "ti,omap4430", "ti,omap4";
|
||
|
|
interrupt-parent = <&wakeupgen>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
chosen { };
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
i2c0 = &i2c1;
|
||
|
|
i2c1 = &i2c2;
|
||
|
|
i2c2 = &i2c3;
|
||
|
|
i2c3 = &i2c4;
|
||
|
|
serial0 = &uart1;
|
||
|
|
serial1 = &uart2;
|
||
|
|
serial2 = &uart3;
|
||
|
|
serial3 = &uart4;
|
||
|
|
};
|
||
|
|
|
||
|
|
cpus {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
cpu@0 {
|
||
|
|
compatible = "arm,cortex-a9";
|
||
|
|
device_type = "cpu";
|
||
|
|
next-level-cache = <&L2>;
|
||
|
|
reg = <0x0>;
|
||
|
|
|
||
|
|
clocks = <&dpll_mpu_ck>;
|
||
|
|
clock-names = "cpu";
|
||
|
|
|
||
|
|
clock-latency = <300000>; /* From omap-cpufreq driver */
|
||
|
|
};
|
||
|
|
cpu@1 {
|
||
|
|
compatible = "arm,cortex-a9";
|
||
|
|
device_type = "cpu";
|
||
|
|
next-level-cache = <&L2>;
|
||
|
|
reg = <0x1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Note that 4430 needs cross trigger interface (CTI) supported
|
||
|
|
* before we can configure the interrupts. This means sampling
|
||
|
|
* events are not supported for pmu. Note that 4460 does not use
|
||
|
|
* CTI, see also 4460.dtsi.
|
||
|
|
*/
|
||
|
|
pmu {
|
||
|
|
compatible = "arm,cortex-a9-pmu";
|
||
|
|
ti,hwmods = "debugss";
|
||
|
|
};
|
||
|
|
|
||
|
|
gic: interrupt-controller@48241000 {
|
||
|
|
compatible = "arm,cortex-a9-gic";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <3>;
|
||
|
|
reg = <0x48241000 0x1000>,
|
||
|
|
<0x48240100 0x0100>;
|
||
|
|
interrupt-parent = <&gic>;
|
||
|
|
};
|
||
|
|
|
||
|
|
L2: l2-cache-controller@48242000 {
|
||
|
|
compatible = "arm,pl310-cache";
|
||
|
|
reg = <0x48242000 0x1000>;
|
||
|
|
cache-unified;
|
||
|
|
cache-level = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
local-timer@48240600 {
|
||
|
|
compatible = "arm,cortex-a9-twd-timer";
|
||
|
|
clocks = <&mpu_periphclk>;
|
||
|
|
reg = <0x48240600 0x20>;
|
||
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
|
||
|
|
interrupt-parent = <&gic>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wakeupgen: interrupt-controller@48281000 {
|
||
|
|
compatible = "ti,omap4-wugen-mpu";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <3>;
|
||
|
|
reg = <0x48281000 0x1000>;
|
||
|
|
interrupt-parent = <&gic>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The soc node represents the soc top level view. It is used for IPs
|
||
|
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
||
|
|
*/
|
||
|
|
soc {
|
||
|
|
compatible = "ti,omap-infra";
|
||
|
|
mpu {
|
||
|
|
compatible = "ti,omap4-mpu";
|
||
|
|
ti,hwmods = "mpu";
|
||
|
|
sram = <&ocmcram>;
|
||
|
|
};
|
||
|
|
|
||
|
|
dsp {
|
||
|
|
compatible = "ti,omap3-c64";
|
||
|
|
ti,hwmods = "dsp";
|
||
|
|
};
|
||
|
|
|
||
|
|
iva {
|
||
|
|
compatible = "ti,ivahd";
|
||
|
|
ti,hwmods = "iva";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* XXX: Use a flat representation of the OMAP4 interconnect.
|
||
|
|
* The real OMAP interconnect network is quite complex.
|
||
|
|
* Since it will not bring real advantage to represent that in DT for
|
||
|
|
* the moment, just use a fake OCP bus entry to represent the whole bus
|
||
|
|
* hierarchy.
|
||
|
|
*/
|
||
|
|
ocp {
|
||
|
|
compatible = "ti,omap4-l3-noc", "simple-bus";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges;
|
||
|
|
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
|
||
|
|
reg = <0x44000000 0x1000>,
|
||
|
|
<0x44800000 0x2000>,
|
||
|
|
<0x45000000 0x1000>;
|
||
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
|
||
|
|
l4_cfg: l4@4a000000 {
|
||
|
|
compatible = "ti,omap4-l4-cfg", "simple-bus";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x4a000000 0x1000000>;
|
||
|
|
|
||
|
|
cm1: cm1@4000 {
|
||
|
|
compatible = "ti,omap4-cm1";
|
||
|
|
reg = <0x4000 0x2000>;
|
||
|
|
|
||
|
|
cm1_clocks: clocks {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
cm1_clockdomains: clockdomains {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
cm2: cm2@8000 {
|
||
|
|
compatible = "ti,omap4-cm2";
|
||
|
|
reg = <0x8000 0x3000>;
|
||
|
|
|
||
|
|
cm2_clocks: clocks {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
cm2_clockdomains: clockdomains {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
omap4_scm_core: scm@2000 {
|
||
|
|
compatible = "ti,omap4-scm-core", "simple-bus";
|
||
|
|
reg = <0x2000 0x1000>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x2000 0x1000>;
|
||
|
|
ti,hwmods = "ctrl_module_core";
|
||
|
|
|
||
|
|
scm_conf: scm_conf@0 {
|
||
|
|
compatible = "syscon";
|
||
|
|
reg = <0x0 0x800>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
omap4_padconf_core: scm@100000 {
|
||
|
|
compatible = "ti,omap4-scm-padconf-core",
|
||
|
|
"simple-bus";
|
||
|
|
reg = <0x100000 0x1000>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x100000 0x1000>;
|
||
|
|
ti,hwmods = "ctrl_module_pad_core";
|
||
|
|
|
||
|
|
omap4_pmx_core: pinmux@40 {
|
||
|
|
compatible = "ti,omap4-padconf",
|
||
|
|
"pinctrl-single";
|
||
|
|
reg = <0x40 0x0196>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
#pinctrl-cells = <1>;
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
interrupt-controller;
|
||
|
|
pinctrl-single,register-width = <16>;
|
||
|
|
pinctrl-single,function-mask = <0x7fff>;
|
||
|
|
};
|
||
|
|
|
||
|
|
omap4_padconf_global: omap4_padconf_global@5a0 {
|
||
|
|
compatible = "syscon",
|
||
|
|
"simple-bus";
|
||
|
|
reg = <0x5a0 0x170>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x5a0 0x170>;
|
||
|
|
|
||
|
|
pbias_regulator: pbias_regulator@60 {
|
||
|
|
compatible = "ti,pbias-omap4", "ti,pbias-omap";
|
||
|
|
reg = <0x60 0x4>;
|
||
|
|
syscon = <&omap4_padconf_global>;
|
||
|
|
pbias_mmc_reg: pbias_mmc_omap4 {
|
||
|
|
regulator-name = "pbias_mmc_omap4";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
l4_wkup: l4@300000 {
|
||
|
|
compatible = "ti,omap4-l4-wkup", "simple-bus";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x300000 0x40000>;
|
||
|
|
|
||
|
|
counter32k: counter@4000 {
|
||
|
|
compatible = "ti,omap-counter32k";
|
||
|
|
reg = <0x4000 0x20>;
|
||
|
|
ti,hwmods = "counter_32k";
|
||
|
|
};
|
||
|
|
|
||
|
|
prm: prm@6000 {
|
||
|
|
compatible = "ti,omap4-prm";
|
||
|
|
reg = <0x6000 0x3000>;
|
||
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
|
||
|
|
prm_clocks: clocks {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
prm_clockdomains: clockdomains {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
scrm: scrm@a000 {
|
||
|
|
compatible = "ti,omap4-scrm";
|
||
|
|
reg = <0xa000 0x2000>;
|
||
|
|
|
||
|
|
scrm_clocks: clocks {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
scrm_clockdomains: clockdomains {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
omap4_scm_wkup: scm@c000 {
|
||
|
|
compatible = "ti,omap4-scm-wkup";
|
||
|
|
reg = <0xc000 0x1000>;
|
||
|
|
ti,hwmods = "ctrl_module_wkup";
|
||
|
|
};
|
||
|
|
|
||
|
|
omap4_padconf_wkup: padconf@1e000 {
|
||
|
|
compatible = "ti,omap4-scm-padconf-wkup",
|
||
|
|
"simple-bus";
|
||
|
|
reg = <0x1e000 0x1000>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x1e000 0x1000>;
|
||
|
|
ti,hwmods = "ctrl_module_pad_wkup";
|
||
|
|
|
||
|
|
omap4_pmx_wkup: pinmux@40 {
|
||
|
|
compatible = "ti,omap4-padconf",
|
||
|
|
"pinctrl-single";
|
||
|
|
reg = <0x40 0x0038>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
#pinctrl-cells = <1>;
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
interrupt-controller;
|
||
|
|
pinctrl-single,register-width = <16>;
|
||
|
|
pinctrl-single,function-mask = <0x7fff>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
ocmcram: ocmcram@40304000 {
|
||
|
|
compatible = "mmio-sram";
|
||
|
|
reg = <0x40304000 0xa000>; /* 40k */
|
||
|
|
};
|
||
|
|
|
||
|
|
sdma: dma-controller@4a056000 {
|
||
|
|
compatible = "ti,omap4430-sdma";
|
||
|
|
reg = <0x4a056000 0x1000>;
|
||
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#dma-cells = <1>;
|
||
|
|
dma-channels = <32>;
|
||
|
|
dma-requests = <127>;
|
||
|
|
ti,hwmods = "dma_system";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio1: gpio@4a310000 {
|
||
|
|
compatible = "ti,omap4-gpio";
|
||
|
|
reg = <0x4a310000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "gpio1";
|
||
|
|
ti,gpio-always-on;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio2: gpio@48055000 {
|
||
|
|
compatible = "ti,omap4-gpio";
|
||
|
|
reg = <0x48055000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "gpio2";
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio3: gpio@48057000 {
|
||
|
|
compatible = "ti,omap4-gpio";
|
||
|
|
reg = <0x48057000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "gpio3";
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio4: gpio@48059000 {
|
||
|
|
compatible = "ti,omap4-gpio";
|
||
|
|
reg = <0x48059000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "gpio4";
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio5: gpio@4805b000 {
|
||
|
|
compatible = "ti,omap4-gpio";
|
||
|
|
reg = <0x4805b000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "gpio5";
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio6: gpio@4805d000 {
|
||
|
|
compatible = "ti,omap4-gpio";
|
||
|
|
reg = <0x4805d000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "gpio6";
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@48076000 {
|
||
|
|
compatible = "ti,sysc-omap4";
|
||
|
|
ti,hwmods = "slimbus2";
|
||
|
|
reg = <0x48076000 0x4>,
|
||
|
|
<0x48076010 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x48076000 0x001000>;
|
||
|
|
|
||
|
|
/* No child device binding or driver in mainline */
|
||
|
|
};
|
||
|
|
|
||
|
|
elm: elm@48078000 {
|
||
|
|
compatible = "ti,am3352-elm";
|
||
|
|
reg = <0x48078000 0x2000>;
|
||
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "elm";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpmc: gpmc@50000000 {
|
||
|
|
compatible = "ti,omap4430-gpmc";
|
||
|
|
reg = <0x50000000 0x1000>;
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
dmas = <&sdma 4>;
|
||
|
|
dma-names = "rxtx";
|
||
|
|
gpmc,num-cs = <8>;
|
||
|
|
gpmc,num-waitpins = <4>;
|
||
|
|
ti,hwmods = "gpmc";
|
||
|
|
ti,no-idle-on-init;
|
||
|
|
clocks = <&l3_div_ck>;
|
||
|
|
clock-names = "fck";
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart1: serial@4806a000 {
|
||
|
|
compatible = "ti,omap4-uart";
|
||
|
|
reg = <0x4806a000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "uart1";
|
||
|
|
clock-frequency = <48000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart2: serial@4806c000 {
|
||
|
|
compatible = "ti,omap4-uart";
|
||
|
|
reg = <0x4806c000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "uart2";
|
||
|
|
clock-frequency = <48000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart3: serial@48020000 {
|
||
|
|
compatible = "ti,omap4-uart";
|
||
|
|
reg = <0x48020000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "uart3";
|
||
|
|
clock-frequency = <48000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart4: serial@4806e000 {
|
||
|
|
compatible = "ti,omap4-uart";
|
||
|
|
reg = <0x4806e000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "uart4";
|
||
|
|
clock-frequency = <48000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@4a0db000 {
|
||
|
|
compatible = "ti,sysc-sr";
|
||
|
|
ti,hwmods = "smartreflex_iva";
|
||
|
|
reg = <0x4a0db000 0x4>,
|
||
|
|
<0x4a0db008 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x4a0db000 0x001000>;
|
||
|
|
|
||
|
|
smartreflex_iva: smartreflex@0 {
|
||
|
|
compatible = "ti,omap4-smartreflex-iva";
|
||
|
|
reg = <0 0x80>;
|
||
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@4a0dd000 {
|
||
|
|
compatible = "ti,sysc-sr";
|
||
|
|
ti,hwmods = "smartreflex_core";
|
||
|
|
reg = <0x4a0dd000 0x4>,
|
||
|
|
<0x4a0dd008 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x4a0dd000 0x001000>;
|
||
|
|
|
||
|
|
smartreflex_core: smartreflex@0 {
|
||
|
|
compatible = "ti,omap4-smartreflex-core";
|
||
|
|
reg = <0 0x80>;
|
||
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@4a0d9000 {
|
||
|
|
compatible = "ti,sysc-sr";
|
||
|
|
ti,hwmods = "smartreflex_mpu";
|
||
|
|
reg = <0x4a0d9000 0x4>,
|
||
|
|
<0x4a0d9008 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x4a0d9000 0x001000>;
|
||
|
|
|
||
|
|
smartreflex_mpu: smartreflex@0 {
|
||
|
|
compatible = "ti,omap4-smartreflex-mpu";
|
||
|
|
reg = <0 0x80>;
|
||
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
hwspinlock: spinlock@4a0f6000 {
|
||
|
|
compatible = "ti,omap4-hwspinlock";
|
||
|
|
reg = <0x4a0f6000 0x1000>;
|
||
|
|
ti,hwmods = "spinlock";
|
||
|
|
#hwlock-cells = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c1: i2c@48070000 {
|
||
|
|
compatible = "ti,omap4-i2c";
|
||
|
|
reg = <0x48070000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,hwmods = "i2c1";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c2: i2c@48072000 {
|
||
|
|
compatible = "ti,omap4-i2c";
|
||
|
|
reg = <0x48072000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,hwmods = "i2c2";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c3: i2c@48060000 {
|
||
|
|
compatible = "ti,omap4-i2c";
|
||
|
|
reg = <0x48060000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,hwmods = "i2c3";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c4: i2c@48350000 {
|
||
|
|
compatible = "ti,omap4-i2c";
|
||
|
|
reg = <0x48350000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,hwmods = "i2c4";
|
||
|
|
};
|
||
|
|
|
||
|
|
mcspi1: spi@48098000 {
|
||
|
|
compatible = "ti,omap4-mcspi";
|
||
|
|
reg = <0x48098000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,hwmods = "mcspi1";
|
||
|
|
ti,spi-num-cs = <4>;
|
||
|
|
dmas = <&sdma 35>,
|
||
|
|
<&sdma 36>,
|
||
|
|
<&sdma 37>,
|
||
|
|
<&sdma 38>,
|
||
|
|
<&sdma 39>,
|
||
|
|
<&sdma 40>,
|
||
|
|
<&sdma 41>,
|
||
|
|
<&sdma 42>;
|
||
|
|
dma-names = "tx0", "rx0", "tx1", "rx1",
|
||
|
|
"tx2", "rx2", "tx3", "rx3";
|
||
|
|
};
|
||
|
|
|
||
|
|
mcspi2: spi@4809a000 {
|
||
|
|
compatible = "ti,omap4-mcspi";
|
||
|
|
reg = <0x4809a000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,hwmods = "mcspi2";
|
||
|
|
ti,spi-num-cs = <2>;
|
||
|
|
dmas = <&sdma 43>,
|
||
|
|
<&sdma 44>,
|
||
|
|
<&sdma 45>,
|
||
|
|
<&sdma 46>;
|
||
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
||
|
|
};
|
||
|
|
|
||
|
|
hdqw1w: 1w@480b2000 {
|
||
|
|
compatible = "ti,omap3-1w";
|
||
|
|
reg = <0x480b2000 0x1000>;
|
||
|
|
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "hdq1w";
|
||
|
|
};
|
||
|
|
|
||
|
|
mcspi3: spi@480b8000 {
|
||
|
|
compatible = "ti,omap4-mcspi";
|
||
|
|
reg = <0x480b8000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,hwmods = "mcspi3";
|
||
|
|
ti,spi-num-cs = <2>;
|
||
|
|
dmas = <&sdma 15>, <&sdma 16>;
|
||
|
|
dma-names = "tx0", "rx0";
|
||
|
|
};
|
||
|
|
|
||
|
|
mcspi4: spi@480ba000 {
|
||
|
|
compatible = "ti,omap4-mcspi";
|
||
|
|
reg = <0x480ba000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,hwmods = "mcspi4";
|
||
|
|
ti,spi-num-cs = <1>;
|
||
|
|
dmas = <&sdma 70>, <&sdma 71>;
|
||
|
|
dma-names = "tx0", "rx0";
|
||
|
|
};
|
||
|
|
|
||
|
|
mmc1: mmc@4809c000 {
|
||
|
|
compatible = "ti,omap4-hsmmc";
|
||
|
|
reg = <0x4809c000 0x400>;
|
||
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "mmc1";
|
||
|
|
ti,dual-volt;
|
||
|
|
ti,needs-special-reset;
|
||
|
|
dmas = <&sdma 61>, <&sdma 62>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
pbias-supply = <&pbias_mmc_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mmc2: mmc@480b4000 {
|
||
|
|
compatible = "ti,omap4-hsmmc";
|
||
|
|
reg = <0x480b4000 0x400>;
|
||
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "mmc2";
|
||
|
|
ti,needs-special-reset;
|
||
|
|
dmas = <&sdma 47>, <&sdma 48>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
};
|
||
|
|
|
||
|
|
mmc3: mmc@480ad000 {
|
||
|
|
compatible = "ti,omap4-hsmmc";
|
||
|
|
reg = <0x480ad000 0x400>;
|
||
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "mmc3";
|
||
|
|
ti,needs-special-reset;
|
||
|
|
dmas = <&sdma 77>, <&sdma 78>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
};
|
||
|
|
|
||
|
|
mmc4: mmc@480d1000 {
|
||
|
|
compatible = "ti,omap4-hsmmc";
|
||
|
|
reg = <0x480d1000 0x400>;
|
||
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "mmc4";
|
||
|
|
ti,needs-special-reset;
|
||
|
|
dmas = <&sdma 57>, <&sdma 58>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
};
|
||
|
|
|
||
|
|
mmc5: mmc@480d5000 {
|
||
|
|
compatible = "ti,omap4-hsmmc";
|
||
|
|
reg = <0x480d5000 0x400>;
|
||
|
|
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "mmc5";
|
||
|
|
ti,needs-special-reset;
|
||
|
|
dmas = <&sdma 59>, <&sdma 60>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
};
|
||
|
|
|
||
|
|
hsi: hsi@4a058000 {
|
||
|
|
compatible = "ti,omap4-hsi";
|
||
|
|
reg = <0x4a058000 0x4000>,
|
||
|
|
<0x4a05c000 0x1000>;
|
||
|
|
reg-names = "sys", "gdd";
|
||
|
|
ti,hwmods = "hsi";
|
||
|
|
|
||
|
|
clocks = <&hsi_fck>;
|
||
|
|
clock-names = "hsi_fck";
|
||
|
|
|
||
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "gdd_mpu";
|
||
|
|
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x4a058000 0x4000>;
|
||
|
|
|
||
|
|
hsi_port1: hsi-port@2000 {
|
||
|
|
compatible = "ti,omap4-hsi-port";
|
||
|
|
reg = <0x2000 0x800>,
|
||
|
|
<0x2800 0x800>;
|
||
|
|
reg-names = "tx", "rx";
|
||
|
|
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
hsi_port2: hsi-port@3000 {
|
||
|
|
compatible = "ti,omap4-hsi-port";
|
||
|
|
reg = <0x3000 0x800>,
|
||
|
|
<0x3800 0x800>;
|
||
|
|
reg-names = "tx", "rx";
|
||
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mmu_dsp: mmu@4a066000 {
|
||
|
|
compatible = "ti,omap4-iommu";
|
||
|
|
reg = <0x4a066000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "mmu_dsp";
|
||
|
|
#iommu-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@52000000 {
|
||
|
|
compatible = "ti,sysc-omap4";
|
||
|
|
ti,hwmods = "iss";
|
||
|
|
reg = <0x52000000 0x4>,
|
||
|
|
<0x52000010 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x52000000 0x1000000>;
|
||
|
|
|
||
|
|
/* No child device binding, driver in staging */
|
||
|
|
};
|
||
|
|
|
||
|
|
mmu_ipu: mmu@55082000 {
|
||
|
|
compatible = "ti,omap4-iommu";
|
||
|
|
reg = <0x55082000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "mmu_ipu";
|
||
|
|
#iommu-cells = <0>;
|
||
|
|
ti,iommu-bus-err-back;
|
||
|
|
};
|
||
|
|
|
||
|
|
wdt2: wdt@4a314000 {
|
||
|
|
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
|
||
|
|
reg = <0x4a314000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "wd_timer2";
|
||
|
|
};
|
||
|
|
|
||
|
|
wdt3: wdt@40130000 {
|
||
|
|
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
|
||
|
|
reg = <0x40130000 0x80>, /* MPU private access */
|
||
|
|
<0x49030000 0x80>; /* L3 Interconnect */
|
||
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "wd_timer3";
|
||
|
|
};
|
||
|
|
|
||
|
|
mcpdm: mcpdm@40132000 {
|
||
|
|
compatible = "ti,omap4-mcpdm";
|
||
|
|
reg = <0x40132000 0x7f>, /* MPU private access */
|
||
|
|
<0x49032000 0x7f>; /* L3 Interconnect */
|
||
|
|
reg-names = "mpu", "dma";
|
||
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "mcpdm";
|
||
|
|
dmas = <&sdma 65>,
|
||
|
|
<&sdma 66>;
|
||
|
|
dma-names = "up_link", "dn_link";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
dmic: dmic@4012e000 {
|
||
|
|
compatible = "ti,omap4-dmic";
|
||
|
|
reg = <0x4012e000 0x7f>, /* MPU private access */
|
||
|
|
<0x4902e000 0x7f>; /* L3 Interconnect */
|
||
|
|
reg-names = "mpu", "dma";
|
||
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "dmic";
|
||
|
|
dmas = <&sdma 67>;
|
||
|
|
dma-names = "up_link";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
mcbsp1: mcbsp@40122000 {
|
||
|
|
compatible = "ti,omap4-mcbsp";
|
||
|
|
reg = <0x40122000 0xff>, /* MPU private access */
|
||
|
|
<0x49022000 0xff>; /* L3 Interconnect */
|
||
|
|
reg-names = "mpu", "dma";
|
||
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "common";
|
||
|
|
ti,buffer-size = <128>;
|
||
|
|
ti,hwmods = "mcbsp1";
|
||
|
|
dmas = <&sdma 33>,
|
||
|
|
<&sdma 34>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
mcbsp2: mcbsp@40124000 {
|
||
|
|
compatible = "ti,omap4-mcbsp";
|
||
|
|
reg = <0x40124000 0xff>, /* MPU private access */
|
||
|
|
<0x49024000 0xff>; /* L3 Interconnect */
|
||
|
|
reg-names = "mpu", "dma";
|
||
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "common";
|
||
|
|
ti,buffer-size = <128>;
|
||
|
|
ti,hwmods = "mcbsp2";
|
||
|
|
dmas = <&sdma 17>,
|
||
|
|
<&sdma 18>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
mcbsp3: mcbsp@40126000 {
|
||
|
|
compatible = "ti,omap4-mcbsp";
|
||
|
|
reg = <0x40126000 0xff>, /* MPU private access */
|
||
|
|
<0x49026000 0xff>; /* L3 Interconnect */
|
||
|
|
reg-names = "mpu", "dma";
|
||
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "common";
|
||
|
|
ti,buffer-size = <128>;
|
||
|
|
ti,hwmods = "mcbsp3";
|
||
|
|
dmas = <&sdma 19>,
|
||
|
|
<&sdma 20>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@40128000 {
|
||
|
|
compatible = "ti,sysc-mcasp";
|
||
|
|
ti,hwmods = "mcasp";
|
||
|
|
reg = <0x40128004 0x4>;
|
||
|
|
reg-names = "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0x00000000 0x40128000 0x1000>, /* MPU */
|
||
|
|
<0x49028000 0x49028000 0x1000>; /* L3 */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Child device unsupported by davinci-mcasp. At least
|
||
|
|
* RX path is disabled for omap4, and only DIT mode
|
||
|
|
* works with no I2S. See also old Android kernel
|
||
|
|
* omap-mcasp driver for more information.
|
||
|
|
*/
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@4012c000 {
|
||
|
|
compatible = "ti,sysc-omap4";
|
||
|
|
ti,hwmods = "slimbus1";
|
||
|
|
reg = <0x4012c000 0x4>,
|
||
|
|
<0x4012c010 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
|
||
|
|
<0x4902c000 0x4902c000 0x1000>; /* L3 */
|
||
|
|
|
||
|
|
/* No child device binding or driver in mainline */
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@401f1000 {
|
||
|
|
compatible = "ti,sysc-omap4";
|
||
|
|
ti,hwmods = "aess";
|
||
|
|
reg = <0x401f1000 0x4>,
|
||
|
|
<0x401f1010 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */
|
||
|
|
<0x490f1000 0x490f1000 0x1000>; /* L3 */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* No child device binding or driver in mainline.
|
||
|
|
* See Android tree and related upstreaming efforts
|
||
|
|
* for the old driver.
|
||
|
|
*/
|
||
|
|
};
|
||
|
|
|
||
|
|
mcbsp4: mcbsp@48096000 {
|
||
|
|
compatible = "ti,omap4-mcbsp";
|
||
|
|
reg = <0x48096000 0xff>; /* L4 Interconnect */
|
||
|
|
reg-names = "mpu";
|
||
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "common";
|
||
|
|
ti,buffer-size = <128>;
|
||
|
|
ti,hwmods = "mcbsp4";
|
||
|
|
dmas = <&sdma 31>,
|
||
|
|
<&sdma 32>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
keypad: keypad@4a31c000 {
|
||
|
|
compatible = "ti,omap4-keypad";
|
||
|
|
reg = <0x4a31c000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
reg-names = "mpu";
|
||
|
|
ti,hwmods = "kbd";
|
||
|
|
};
|
||
|
|
|
||
|
|
dmm@4e000000 {
|
||
|
|
compatible = "ti,omap4-dmm";
|
||
|
|
reg = <0x4e000000 0x800>;
|
||
|
|
interrupts = <0 113 0x4>;
|
||
|
|
ti,hwmods = "dmm";
|
||
|
|
};
|
||
|
|
|
||
|
|
emif1: emif@4c000000 {
|
||
|
|
compatible = "ti,emif-4d";
|
||
|
|
reg = <0x4c000000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "emif1";
|
||
|
|
ti,no-idle-on-init;
|
||
|
|
phy-type = <1>;
|
||
|
|
hw-caps-read-idle-ctrl;
|
||
|
|
hw-caps-ll-interface;
|
||
|
|
hw-caps-temp-alert;
|
||
|
|
};
|
||
|
|
|
||
|
|
emif2: emif@4d000000 {
|
||
|
|
compatible = "ti,emif-4d";
|
||
|
|
reg = <0x4d000000 0x100>;
|
||
|
|
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "emif2";
|
||
|
|
ti,no-idle-on-init;
|
||
|
|
phy-type = <1>;
|
||
|
|
hw-caps-read-idle-ctrl;
|
||
|
|
hw-caps-ll-interface;
|
||
|
|
hw-caps-temp-alert;
|
||
|
|
};
|
||
|
|
|
||
|
|
ocp2scp@4a0ad000 {
|
||
|
|
compatible = "ti,omap-ocp2scp";
|
||
|
|
reg = <0x4a0ad000 0x1f>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges;
|
||
|
|
ti,hwmods = "ocp2scp_usb_phy";
|
||
|
|
usb2_phy: usb2phy@4a0ad080 {
|
||
|
|
compatible = "ti,omap-usb2";
|
||
|
|
reg = <0x4a0ad080 0x58>;
|
||
|
|
ctrl-module = <&omap_control_usb2phy>;
|
||
|
|
clocks = <&usb_phy_cm_clk32k>;
|
||
|
|
clock-names = "wkupclk";
|
||
|
|
#phy-cells = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mailbox: mailbox@4a0f4000 {
|
||
|
|
compatible = "ti,omap4-mailbox";
|
||
|
|
reg = <0x4a0f4000 0x200>;
|
||
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "mailbox";
|
||
|
|
#mbox-cells = <1>;
|
||
|
|
ti,mbox-num-users = <3>;
|
||
|
|
ti,mbox-num-fifos = <8>;
|
||
|
|
mbox_ipu: mbox_ipu {
|
||
|
|
ti,mbox-tx = <0 0 0>;
|
||
|
|
ti,mbox-rx = <1 0 0>;
|
||
|
|
};
|
||
|
|
mbox_dsp: mbox_dsp {
|
||
|
|
ti,mbox-tx = <3 0 0>;
|
||
|
|
ti,mbox-rx = <2 0 0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@4a10a000 {
|
||
|
|
compatible = "ti,sysc-omap4";
|
||
|
|
ti,hwmods = "fdif";
|
||
|
|
reg = <0x4a10a000 0x4>,
|
||
|
|
<0x4a10a010 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x4a10a000 0x1000>;
|
||
|
|
|
||
|
|
/* No child device binding or driver in mainline */
|
||
|
|
};
|
||
|
|
|
||
|
|
timer1: timer@4a318000 {
|
||
|
|
compatible = "ti,omap3430-timer";
|
||
|
|
reg = <0x4a318000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer1";
|
||
|
|
ti,timer-alwon;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer2: timer@48032000 {
|
||
|
|
compatible = "ti,omap3430-timer";
|
||
|
|
reg = <0x48032000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer2";
|
||
|
|
};
|
||
|
|
|
||
|
|
timer3: timer@48034000 {
|
||
|
|
compatible = "ti,omap4430-timer";
|
||
|
|
reg = <0x48034000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer3";
|
||
|
|
};
|
||
|
|
|
||
|
|
timer4: timer@48036000 {
|
||
|
|
compatible = "ti,omap4430-timer";
|
||
|
|
reg = <0x48036000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer4";
|
||
|
|
};
|
||
|
|
|
||
|
|
timer5: timer@40138000 {
|
||
|
|
compatible = "ti,omap4430-timer";
|
||
|
|
reg = <0x40138000 0x80>,
|
||
|
|
<0x49038000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer5";
|
||
|
|
ti,timer-dsp;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer6: timer@4013a000 {
|
||
|
|
compatible = "ti,omap4430-timer";
|
||
|
|
reg = <0x4013a000 0x80>,
|
||
|
|
<0x4903a000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer6";
|
||
|
|
ti,timer-dsp;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer7: timer@4013c000 {
|
||
|
|
compatible = "ti,omap4430-timer";
|
||
|
|
reg = <0x4013c000 0x80>,
|
||
|
|
<0x4903c000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer7";
|
||
|
|
ti,timer-dsp;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer8: timer@4013e000 {
|
||
|
|
compatible = "ti,omap4430-timer";
|
||
|
|
reg = <0x4013e000 0x80>,
|
||
|
|
<0x4903e000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer8";
|
||
|
|
ti,timer-pwm;
|
||
|
|
ti,timer-dsp;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer9: timer@4803e000 {
|
||
|
|
compatible = "ti,omap4430-timer";
|
||
|
|
reg = <0x4803e000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer9";
|
||
|
|
ti,timer-pwm;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer10: timer@48086000 {
|
||
|
|
compatible = "ti,omap3430-timer";
|
||
|
|
reg = <0x48086000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer10";
|
||
|
|
ti,timer-pwm;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer11: timer@48088000 {
|
||
|
|
compatible = "ti,omap4430-timer";
|
||
|
|
reg = <0x48088000 0x80>;
|
||
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "timer11";
|
||
|
|
ti,timer-pwm;
|
||
|
|
};
|
||
|
|
|
||
|
|
usbhstll: usbhstll@4a062000 {
|
||
|
|
compatible = "ti,usbhs-tll";
|
||
|
|
reg = <0x4a062000 0x1000>;
|
||
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "usb_tll_hs";
|
||
|
|
};
|
||
|
|
|
||
|
|
usbhshost: usbhshost@4a064000 {
|
||
|
|
compatible = "ti,usbhs-host";
|
||
|
|
reg = <0x4a064000 0x800>;
|
||
|
|
ti,hwmods = "usb_host_hs";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges;
|
||
|
|
clocks = <&init_60m_fclk>,
|
||
|
|
<&xclk60mhsp1_ck>,
|
||
|
|
<&xclk60mhsp2_ck>;
|
||
|
|
clock-names = "refclk_60m_int",
|
||
|
|
"refclk_60m_ext_p1",
|
||
|
|
"refclk_60m_ext_p2";
|
||
|
|
|
||
|
|
usbhsohci: ohci@4a064800 {
|
||
|
|
compatible = "ti,ohci-omap3";
|
||
|
|
reg = <0x4a064800 0x400>;
|
||
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
remote-wakeup-connected;
|
||
|
|
};
|
||
|
|
|
||
|
|
usbhsehci: ehci@4a064c00 {
|
||
|
|
compatible = "ti,ehci-omap";
|
||
|
|
reg = <0x4a064c00 0x400>;
|
||
|
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
omap_control_usb2phy: control-phy@4a002300 {
|
||
|
|
compatible = "ti,control-phy-usb2";
|
||
|
|
reg = <0x4a002300 0x4>;
|
||
|
|
reg-names = "power";
|
||
|
|
};
|
||
|
|
|
||
|
|
omap_control_usbotg: control-phy@4a00233c {
|
||
|
|
compatible = "ti,control-phy-otghs";
|
||
|
|
reg = <0x4a00233c 0x4>;
|
||
|
|
reg-names = "otghs_control";
|
||
|
|
};
|
||
|
|
|
||
|
|
usb_otg_hs: usb_otg_hs@4a0ab000 {
|
||
|
|
compatible = "ti,omap4-musb";
|
||
|
|
reg = <0x4a0ab000 0x7ff>;
|
||
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "mc", "dma";
|
||
|
|
ti,hwmods = "usb_otg_hs";
|
||
|
|
usb-phy = <&usb2_phy>;
|
||
|
|
phys = <&usb2_phy>;
|
||
|
|
phy-names = "usb2-phy";
|
||
|
|
multipoint = <1>;
|
||
|
|
num-eps = <16>;
|
||
|
|
ram-bits = <12>;
|
||
|
|
ctrl-module = <&omap_control_usbotg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
aes1: aes@4b501000 {
|
||
|
|
compatible = "ti,omap4-aes";
|
||
|
|
ti,hwmods = "aes1";
|
||
|
|
reg = <0x4b501000 0xa0>;
|
||
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
dmas = <&sdma 111>, <&sdma 110>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
};
|
||
|
|
|
||
|
|
aes2: aes@4b701000 {
|
||
|
|
compatible = "ti,omap4-aes";
|
||
|
|
ti,hwmods = "aes2";
|
||
|
|
reg = <0x4b701000 0xa0>;
|
||
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
dmas = <&sdma 114>, <&sdma 113>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
};
|
||
|
|
|
||
|
|
des: des@480a5000 {
|
||
|
|
compatible = "ti,omap4-des";
|
||
|
|
ti,hwmods = "des";
|
||
|
|
reg = <0x480a5000 0xa0>;
|
||
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
dmas = <&sdma 117>, <&sdma 116>;
|
||
|
|
dma-names = "tx", "rx";
|
||
|
|
};
|
||
|
|
|
||
|
|
sham: sham@4b100000 {
|
||
|
|
compatible = "ti,omap4-sham";
|
||
|
|
ti,hwmods = "sham";
|
||
|
|
reg = <0x4b100000 0x300>;
|
||
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
dmas = <&sdma 119>;
|
||
|
|
dma-names = "rx";
|
||
|
|
};
|
||
|
|
|
||
|
|
abb_mpu: regulator-abb-mpu {
|
||
|
|
compatible = "ti,abb-v2";
|
||
|
|
regulator-name = "abb_mpu";
|
||
|
|
#address-cells = <0>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,tranxdone-status-mask = <0x80>;
|
||
|
|
clocks = <&sys_clkin_ck>;
|
||
|
|
ti,settling-time = <50>;
|
||
|
|
ti,clock-cycles = <16>;
|
||
|
|
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
abb_iva: regulator-abb-iva {
|
||
|
|
compatible = "ti,abb-v2";
|
||
|
|
regulator-name = "abb_iva";
|
||
|
|
#address-cells = <0>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
ti,tranxdone-status-mask = <0x80000000>;
|
||
|
|
clocks = <&sys_clkin_ck>;
|
||
|
|
ti,settling-time = <50>;
|
||
|
|
ti,clock-cycles = <16>;
|
||
|
|
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
target-module@56000000 {
|
||
|
|
compatible = "ti,sysc-omap4";
|
||
|
|
ti,hwmods = "gpu";
|
||
|
|
reg = <0x5601fc00 0x4>,
|
||
|
|
<0x5601fc10 0x4>;
|
||
|
|
reg-names = "rev", "sysc";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0x56000000 0x2000000>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Closed source PowerVR driver, no child device
|
||
|
|
* binding or driver in mainline
|
||
|
|
*/
|
||
|
|
};
|
||
|
|
|
||
|
|
dss: dss@58000000 {
|
||
|
|
compatible = "ti,omap4-dss";
|
||
|
|
reg = <0x58000000 0x80>;
|
||
|
|
status = "disabled";
|
||
|
|
ti,hwmods = "dss_core";
|
||
|
|
clocks = <&dss_dss_clk>;
|
||
|
|
clock-names = "fck";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges;
|
||
|
|
|
||
|
|
dispc@58001000 {
|
||
|
|
compatible = "ti,omap4-dispc";
|
||
|
|
reg = <0x58001000 0x1000>;
|
||
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
ti,hwmods = "dss_dispc";
|
||
|
|
clocks = <&dss_dss_clk>;
|
||
|
|
clock-names = "fck";
|
||
|
|
};
|
||
|
|
|
||
|
|
rfbi: encoder@58002000 {
|
||
|
|
compatible = "ti,omap4-rfbi";
|
||
|
|
reg = <0x58002000 0x1000>;
|
||
|
|
status = "disabled";
|
||
|
|
ti,hwmods = "dss_rfbi";
|
||
|
|
clocks = <&dss_dss_clk>, <&l3_div_ck>;
|
||
|
|
clock-names = "fck", "ick";
|
||
|
|
};
|
||
|
|
|
||
|
|
venc: encoder@58003000 {
|
||
|
|
compatible = "ti,omap4-venc";
|
||
|
|
reg = <0x58003000 0x1000>;
|
||
|
|
status = "disabled";
|
||
|
|
ti,hwmods = "dss_venc";
|
||
|
|
clocks = <&dss_tv_clk>;
|
||
|
|
clock-names = "fck";
|
||
|
|
};
|
||
|
|
|
||
|
|
dsi1: encoder@58004000 {
|
||
|
|
compatible = "ti,omap4-dsi";
|
||
|
|
reg = <0x58004000 0x200>,
|
||
|
|
<0x58004200 0x40>,
|
||
|
|
<0x58004300 0x20>;
|
||
|
|
reg-names = "proto", "phy", "pll";
|
||
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
status = "disabled";
|
||
|
|
ti,hwmods = "dss_dsi1";
|
||
|
|
clocks = <&dss_dss_clk>, <&dss_sys_clk>;
|
||
|
|
clock-names = "fck", "sys_clk";
|
||
|
|
};
|
||
|
|
|
||
|
|
dsi2: encoder@58005000 {
|
||
|
|
compatible = "ti,omap4-dsi";
|
||
|
|
reg = <0x58005000 0x200>,
|
||
|
|
<0x58005200 0x40>,
|
||
|
|
<0x58005300 0x20>;
|
||
|
|
reg-names = "proto", "phy", "pll";
|
||
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
status = "disabled";
|
||
|
|
ti,hwmods = "dss_dsi2";
|
||
|
|
clocks = <&dss_dss_clk>, <&dss_sys_clk>;
|
||
|
|
clock-names = "fck", "sys_clk";
|
||
|
|
};
|
||
|
|
|
||
|
|
hdmi: encoder@58006000 {
|
||
|
|
compatible = "ti,omap4-hdmi";
|
||
|
|
reg = <0x58006000 0x200>,
|
||
|
|
<0x58006200 0x100>,
|
||
|
|
<0x58006300 0x100>,
|
||
|
|
<0x58006400 0x1000>;
|
||
|
|
reg-names = "wp", "pll", "phy", "core";
|
||
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
status = "disabled";
|
||
|
|
ti,hwmods = "dss_hdmi";
|
||
|
|
clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
|
||
|
|
clock-names = "fck", "sys_clk";
|
||
|
|
dmas = <&sdma 76>;
|
||
|
|
dma-names = "audio_tx";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/include/ "omap44xx-clocks.dtsi"
|