128 lines
4.0 KiB
Plaintext
128 lines
4.0 KiB
Plaintext
|
ImgTec TZ1090 PDC pin controller
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: "img,tz1090-pdc-pinctrl"
|
||
|
|
- reg: Should contain the register physical address and length of the
|
||
|
|
SOC_GPIO_CONTROL registers in the PDC register region.
|
||
|
|
|
||
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the
|
||
|
|
common pinctrl bindings used by client devices, including the meaning of the
|
||
|
|
phrase "pin configuration node".
|
||
|
|
|
||
|
|
TZ1090-PDC's pin configuration nodes act as a container for an arbitrary number
|
||
|
|
of subnodes. Each of these subnodes represents some desired configuration for a
|
||
|
|
pin, a group, or a list of pins or groups. This configuration can include the
|
||
|
|
mux function to select on those pin(s)/group(s), and various pin configuration
|
||
|
|
parameters, such as pull-up, drive strength, etc.
|
||
|
|
|
||
|
|
The name of each subnode is not important; all subnodes should be enumerated
|
||
|
|
and processed purely based on their content.
|
||
|
|
|
||
|
|
Each subnode only affects those parameters that are explicitly listed. In
|
||
|
|
other words, a subnode that lists a mux function but no pin configuration
|
||
|
|
parameters implies no information about any pin configuration parameters.
|
||
|
|
Similarly, a pin subnode that describes a pullup parameter implies no
|
||
|
|
information about e.g. the mux function. For this reason, even seemingly boolean
|
||
|
|
values are actually tristates in this binding: unspecified, off, or on.
|
||
|
|
Unspecified is represented as an absent property, and off/on are represented as
|
||
|
|
integer values 0 and 1.
|
||
|
|
|
||
|
|
Required subnode-properties:
|
||
|
|
- tz1090,pins : An array of strings. Each string contains the name of a pin or
|
||
|
|
group. Valid values for these names are listed below.
|
||
|
|
|
||
|
|
Optional subnode-properties:
|
||
|
|
- tz1090,function: A string containing the name of the function to mux to the
|
||
|
|
pin or group. Valid values for function names are listed below, including
|
||
|
|
which pingroups can be muxed to them.
|
||
|
|
- supported generic pinconfig properties (for further details see
|
||
|
|
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt):
|
||
|
|
- bias-disable
|
||
|
|
- bias-high-impedance
|
||
|
|
- bias-bus-hold
|
||
|
|
- bias-pull-up
|
||
|
|
- bias-pull-down
|
||
|
|
- input-schmitt-enable
|
||
|
|
- input-schmitt-disable
|
||
|
|
- drive-strength: Integer, control drive strength of pins in mA.
|
||
|
|
2: 2mA
|
||
|
|
4: 4mA
|
||
|
|
8: 8mA
|
||
|
|
12: 12mA
|
||
|
|
- low-power-enable: Flag, power-on-start weak pull-down for invalid power.
|
||
|
|
- low-power-disable: Flag, power-on-start weak pull-down disabled.
|
||
|
|
|
||
|
|
Note that many of these properties are only valid for certain specific pins
|
||
|
|
or groups. See the TZ1090 TRM for complete details regarding which groups
|
||
|
|
support which functionality. The Linux pinctrl driver may also be a useful
|
||
|
|
reference.
|
||
|
|
|
||
|
|
Valid values for pin and group names are:
|
||
|
|
|
||
|
|
pins:
|
||
|
|
|
||
|
|
These all support bias-high-impediance, bias-pull-up, bias-pull-down, and
|
||
|
|
bias-bus-hold (which can also be provided to any of the groups below to set
|
||
|
|
it for all gpio pins in that group).
|
||
|
|
|
||
|
|
gpio0, gpio1, sys_wake0, sys_wake1, sys_wake2, ir_data, ext_power.
|
||
|
|
|
||
|
|
mux groups:
|
||
|
|
|
||
|
|
These all support function.
|
||
|
|
|
||
|
|
gpio0
|
||
|
|
pins: gpio0.
|
||
|
|
function: ir_mod_stable_out.
|
||
|
|
gpio1
|
||
|
|
pins: gpio1.
|
||
|
|
function: ir_mod_power_out.
|
||
|
|
|
||
|
|
drive groups:
|
||
|
|
|
||
|
|
These support input-schmitt-enable, input-schmitt-disable,
|
||
|
|
drive-strength, low-power-enable, and low-power-disable.
|
||
|
|
|
||
|
|
pdc
|
||
|
|
pins: gpio0, gpio1, sys_wake0, sys_wake1, sys_wake2, ir_data,
|
||
|
|
ext_power.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
pinctrl_pdc: pinctrl@2006500 {
|
||
|
|
#gpio-range-cells = <3>;
|
||
|
|
compatible = "img,tz1090-pdc-pinctrl";
|
||
|
|
reg = <0x02006500 0x100>;
|
||
|
|
};
|
||
|
|
|
||
|
|
Example board file extracts:
|
||
|
|
|
||
|
|
&pinctrl_pdc {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&syswake_default>;
|
||
|
|
|
||
|
|
syswake_default: syswakes {
|
||
|
|
syswake_cfg {
|
||
|
|
tz1090,pins = "sys_wake0",
|
||
|
|
"sys_wake1",
|
||
|
|
"sys_wake2";
|
||
|
|
pull-up;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
irmod_default: irmod {
|
||
|
|
gpio0_cfg {
|
||
|
|
tz1090,pins = "gpio0";
|
||
|
|
tz1090,function = "ir_mod_stable_out";
|
||
|
|
};
|
||
|
|
gpio1_cfg {
|
||
|
|
tz1090,pins = "gpio1";
|
||
|
|
tz1090,function = "ir_mod_power_out";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
ir: ir@2006200 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&irmod_default>;
|
||
|
|
};
|