ubuntu-linux-kernel/arch/powerpc/sysdev/grackle.c

67 lines
2.0 KiB
C
Raw Permalink Normal View History

2024-04-01 15:06:58 +00:00
/*
* Functions for setting up and using a MPC106 northbridge
* Extracted from arch/powerpc/platforms/powermac/pci.c.
*
* Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
* Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/grackle.h>
#define GRACKLE_CFA(b, d, o) (0x80 | ((b) << 8) | ((d) << 16) \
| (((o) & ~3) << 24))
#define GRACKLE_PICR1_STG 0x00000040
#define GRACKLE_PICR1_LOOPSNOOP 0x00000010
/* N.B. this is called before bridges is initialized, so we can't
use grackle_pcibios_{read,write}_config_dword. */
static inline void grackle_set_stg(struct pci_controller* bp, int enable)
{
unsigned int val;
out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
val = in_le32(bp->cfg_data);
val = enable? (val | GRACKLE_PICR1_STG) :
(val & ~GRACKLE_PICR1_STG);
out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
out_le32(bp->cfg_data, val);
(void)in_le32(bp->cfg_data);
}
static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
{
unsigned int val;
out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
val = in_le32(bp->cfg_data);
val = enable? (val | GRACKLE_PICR1_LOOPSNOOP) :
(val & ~GRACKLE_PICR1_LOOPSNOOP);
out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
out_le32(bp->cfg_data, val);
(void)in_le32(bp->cfg_data);
}
void __init setup_grackle(struct pci_controller *hose)
{
setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
if (of_machine_is_compatible("PowerMac1,1"))
pci_add_flags(PCI_REASSIGN_ALL_BUS);
if (of_machine_is_compatible("AAPL,PowerBook1998"))
grackle_set_loop_snoop(hose, 1);
#if 0 /* Disabled for now, HW problems ??? */
grackle_set_stg(hose, 1);
#endif
}