ubuntu-linux-kernel/arch/cris/arch-v32/mach-fs/hw_settings.S

72 lines
2.3 KiB
ArmAsm
Raw Permalink Normal View History

2024-04-01 15:06:58 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This table is used by some tools to extract hardware parameters.
* The table should be included in the kernel and the decompressor.
* Don't forget to update the tools if you change this table.
*
* Copyright (C) 2001-2007 Axis Communications AB
*
* Authors: Mikael Starvik <starvik@axis.com>
*/
#include <hwregs/asm/reg_map_asm.h>
#include <hwregs/asm/bif_core_defs_asm.h>
#include <hwregs/asm/gio_defs_asm.h>
.ascii "HW_PARAM_MAGIC" ; Magic number
.dword 0xc0004000 ; Kernel start address
; Debug port
#ifdef CONFIG_ETRAX_DEBUG_PORT0
.dword 0
#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
.dword 1
#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
.dword 2
#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
.dword 3
#else
.dword 4 ; No debug
#endif
; Register values
.dword REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg)
.dword CONFIG_ETRAX_MEM_GRP1_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg)
.dword CONFIG_ETRAX_MEM_GRP2_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg)
.dword CONFIG_ETRAX_MEM_GRP3_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg)
.dword CONFIG_ETRAX_MEM_GRP4_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0)
.dword CONFIG_ETRAX_SDRAM_GRP0_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp1)
.dword CONFIG_ETRAX_SDRAM_GRP1_CONFIG
.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing)
.dword CONFIG_ETRAX_SDRAM_TIMING
.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd)
.dword CONFIG_ETRAX_SDRAM_COMMAND
.dword REG_ADDR(gio, regi_gio, rw_pa_dout)
.dword CONFIG_ETRAX_DEF_GIO_PA_OUT
.dword REG_ADDR(gio, regi_gio, rw_pa_oe)
.dword CONFIG_ETRAX_DEF_GIO_PA_OE
.dword REG_ADDR(gio, regi_gio, rw_pb_dout)
.dword CONFIG_ETRAX_DEF_GIO_PB_OUT
.dword REG_ADDR(gio, regi_gio, rw_pb_oe)
.dword CONFIG_ETRAX_DEF_GIO_PB_OE
.dword REG_ADDR(gio, regi_gio, rw_pc_dout)
.dword CONFIG_ETRAX_DEF_GIO_PC_OUT
.dword REG_ADDR(gio, regi_gio, rw_pc_oe)
.dword CONFIG_ETRAX_DEF_GIO_PC_OE
.dword REG_ADDR(gio, regi_gio, rw_pd_dout)
.dword CONFIG_ETRAX_DEF_GIO_PD_OUT
.dword REG_ADDR(gio, regi_gio, rw_pd_oe)
.dword CONFIG_ETRAX_DEF_GIO_PD_OE
.dword REG_ADDR(gio, regi_gio, rw_pe_dout)
.dword CONFIG_ETRAX_DEF_GIO_PE_OUT
.dword REG_ADDR(gio, regi_gio, rw_pe_oe)
.dword CONFIG_ETRAX_DEF_GIO_PE_OE
.dword 0 ; No more register values