244 lines
4.7 KiB
Plaintext
244 lines
4.7 KiB
Plaintext
|
TI LMU (Lighting Management Unit) device tree bindings
|
||
|
|
|
||
|
|
TI LMU driver supports lighting devices below.
|
||
|
|
|
||
|
|
Name Child nodes
|
||
|
|
------ ---------------------------------
|
||
|
|
LM3532 Backlight
|
||
|
|
LM3631 Backlight and regulator
|
||
|
|
LM3632 Backlight and regulator
|
||
|
|
LM3633 Backlight, LED and fault monitor
|
||
|
|
LM3695 Backlight
|
||
|
|
LM3697 Backlight and fault monitor
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: Should be one of:
|
||
|
|
"ti,lm3532"
|
||
|
|
"ti,lm3631"
|
||
|
|
"ti,lm3632"
|
||
|
|
"ti,lm3633"
|
||
|
|
"ti,lm3695"
|
||
|
|
"ti,lm3697"
|
||
|
|
- reg: I2C slave address.
|
||
|
|
0x11 for LM3632
|
||
|
|
0x29 for LM3631
|
||
|
|
0x36 for LM3633, LM3697
|
||
|
|
0x38 for LM3532
|
||
|
|
0x63 for LM3695
|
||
|
|
|
||
|
|
Optional property:
|
||
|
|
- enable-gpios: A GPIO specifier for hardware enable pin.
|
||
|
|
|
||
|
|
Required node:
|
||
|
|
- backlight: All LMU devices have backlight child nodes.
|
||
|
|
For the properties, please refer to [1].
|
||
|
|
|
||
|
|
Optional nodes:
|
||
|
|
- fault-monitor: Hardware fault monitoring driver for LM3633 and LM3697.
|
||
|
|
Required properties:
|
||
|
|
- compatible: Should be one of:
|
||
|
|
"ti,lm3633-fault-monitor"
|
||
|
|
"ti,lm3697-fault-monitor"
|
||
|
|
- leds: LED properties for LM3633. Please refer to [2].
|
||
|
|
- regulators: Regulator properties for LM3631 and LM3632.
|
||
|
|
Please refer to [3].
|
||
|
|
|
||
|
|
[1] ../leds/backlight/ti-lmu-backlight.txt
|
||
|
|
[2] ../leds/leds-lm3633.txt
|
||
|
|
[3] ../regulator/lm363x-regulator.txt
|
||
|
|
|
||
|
|
lm3532@38 {
|
||
|
|
compatible = "ti,lm3532";
|
||
|
|
reg = <0x38>;
|
||
|
|
|
||
|
|
enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
backlight {
|
||
|
|
compatible = "ti,lm3532-backlight";
|
||
|
|
|
||
|
|
lcd {
|
||
|
|
led-sources = <0 1 2>;
|
||
|
|
ramp-up-msec = <30>;
|
||
|
|
ramp-down-msec = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lm3631@29 {
|
||
|
|
compatible = "ti,lm3631";
|
||
|
|
reg = <0x29>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
compatible = "ti,lm363x-regulator";
|
||
|
|
|
||
|
|
vboost {
|
||
|
|
regulator-name = "lcd_boost";
|
||
|
|
regulator-min-microvolt = <4500000>;
|
||
|
|
regulator-max-microvolt = <6350000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcont {
|
||
|
|
regulator-name = "lcd_vcont";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
voref {
|
||
|
|
regulator-name = "lcd_voref";
|
||
|
|
regulator-min-microvolt = <4000000>;
|
||
|
|
regulator-max-microvolt = <6000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vpos {
|
||
|
|
regulator-name = "lcd_vpos";
|
||
|
|
regulator-min-microvolt = <4000000>;
|
||
|
|
regulator-max-microvolt = <6000000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vneg {
|
||
|
|
regulator-name = "lcd_vneg";
|
||
|
|
regulator-min-microvolt = <4000000>;
|
||
|
|
regulator-max-microvolt = <6000000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
backlight {
|
||
|
|
compatible = "ti,lm3631-backlight";
|
||
|
|
|
||
|
|
lcd_bl {
|
||
|
|
led-sources = <0 1>;
|
||
|
|
ramp-up-msec = <300>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lm3632@11 {
|
||
|
|
compatible = "ti,lm3632";
|
||
|
|
reg = <0x11>;
|
||
|
|
|
||
|
|
enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; /* PC2 */
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
compatible = "ti,lm363x-regulator";
|
||
|
|
|
||
|
|
ti,lcm-en1-gpio = <&pioC 0 GPIO_ACTIVE_HIGH>; /* PC0 */
|
||
|
|
ti,lcm-en2-gpio = <&pioC 1 GPIO_ACTIVE_HIGH>; /* PC1 */
|
||
|
|
|
||
|
|
vboost {
|
||
|
|
regulator-name = "lcd_boost";
|
||
|
|
regulator-min-microvolt = <4500000>;
|
||
|
|
regulator-max-microvolt = <6400000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vpos {
|
||
|
|
regulator-name = "lcd_vpos";
|
||
|
|
regulator-min-microvolt = <4000000>;
|
||
|
|
regulator-max-microvolt = <6000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vneg {
|
||
|
|
regulator-name = "lcd_vneg";
|
||
|
|
regulator-min-microvolt = <4000000>;
|
||
|
|
regulator-max-microvolt = <6000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
backlight {
|
||
|
|
compatible = "ti,lm3632-backlight";
|
||
|
|
|
||
|
|
pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */
|
||
|
|
pwm-names = "lmu-backlight";
|
||
|
|
|
||
|
|
lcd {
|
||
|
|
led-sources = <0 1>;
|
||
|
|
pwm-period = <10000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lm3633@36 {
|
||
|
|
compatible = "ti,lm3633";
|
||
|
|
reg = <0x36>;
|
||
|
|
|
||
|
|
enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
backlight {
|
||
|
|
compatible = "ti,lm3633-backlight";
|
||
|
|
|
||
|
|
main {
|
||
|
|
label = "main_lcd";
|
||
|
|
led-sources = <1 2>;
|
||
|
|
ramp-up-msec = <500>;
|
||
|
|
ramp-down-msec = <500>;
|
||
|
|
};
|
||
|
|
|
||
|
|
front {
|
||
|
|
label = "front_lcd";
|
||
|
|
led-sources = <0>;
|
||
|
|
ramp-up-msec = <1000>;
|
||
|
|
ramp-down-msec = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
compatible = "ti,lm3633-leds";
|
||
|
|
|
||
|
|
chan1 {
|
||
|
|
label = "status";
|
||
|
|
led-sources = <1>;
|
||
|
|
led-max-microamp = <6000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan345 {
|
||
|
|
label = "rgb";
|
||
|
|
led-sources = <3 4 5>;
|
||
|
|
led-max-microamp = <10000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
fault-monitor {
|
||
|
|
compatible = "ti,lm3633-fault-monitor";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lm3695@63 {
|
||
|
|
compatible = "ti,lm3695";
|
||
|
|
reg = <0x63>;
|
||
|
|
|
||
|
|
enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
backlight {
|
||
|
|
compatible = "ti,lm3695-backlight";
|
||
|
|
|
||
|
|
lcd {
|
||
|
|
label = "bl";
|
||
|
|
led-sources = <0 1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lm3697@36 {
|
||
|
|
compatible = "ti,lm3697";
|
||
|
|
reg = <0x36>;
|
||
|
|
|
||
|
|
enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
backlight {
|
||
|
|
compatible = "ti,lm3697-backlight";
|
||
|
|
|
||
|
|
lcd {
|
||
|
|
led-sources = <0 1 2>;
|
||
|
|
ramp-up-msec = <200>;
|
||
|
|
ramp-down-msec = <200>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
fault-monitor {
|
||
|
|
compatible = "ti,lm3697-fault-monitor";
|
||
|
|
};
|
||
|
|
};
|