Starfive VisionFive2
====================
The VisionFive2 is a low-cost RISC-V 64-bit based platform, powered by a
Starfive JH7110 processor.
https://doc-en.rvspace.org/Doc_Center/visionfive_2.html
How to build
============
$ make visionfive2_defconfig
$ make
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Preparing the board
===================
Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX).
Insert your SD card.
Power-up the board using an USB-C cable.
chenyf
8b0660016e