*******************************
QMTECH Zynq XC7Z010 Starter Kit
*******************************
This file documents the Buildroot support for the QMTECH [1] Zynq
XC7Z010 Starter Kit [2]. It is a low cost (~55$) Zynq based
development board. The board user manual is available at
[3]. Additional files are available on Github [4].
Build
=====
First, configure Buildroot for the QMTECH Zynq board:
make zynq_qmtech_defconfig
Build all components:
make
You will find in output/images/ the following files:
- boot.bin
- boot.vfat
- devicetree.dtb
- rootfs.cpio
- rootfs.cpio.gz
- rootfs.cpio.uboot
- rootfs.tar
- sdcard.img
- u-boot.bin
- u-boot.img
- uImage
- zynq-qmtech.dtb
Create a bootable micro SD card
===============================
To determine the device associated to the micro SD card have a look in
the /proc/partitions file:
cat /proc/partitions
Buildroot prepares a bootable "sdcard.img" image in the output/images/
directory, ready to be dumped on a micro SD card. Launch the following
command as root:
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
*** WARNING! This will destroy all the card content. Use with care! ***
Boot the QMTECH Zynq board
==========================
To boot your newly created system:
- put a mini USB cable into the J4 Debug USB Port and connect using a
terminal emulator at 115200 bps, 8n1,
- put the prepared micro SD card in the J2 micro SD card slot,
- plug the 5V power supply on the JP4 barrel jack.
Enjoy!
[1]. QMTECH:
http://www.chinaqmtech.com/
[2]. QMTECH Zynq XC7Z010 Starter Kit Product Page:
http://www.chinaqmtech.com/xilinx_zynq_soc
[3]. QMTECH Zynq XC7Z010 Starter Kit Hardware User Manual:
http://www.chinaqmtech.com/filedownload/32552
[4]. QMTECH Github:
https://github.com/ChinaQMTECH/ZYNQ_STARTER_KIT
chenyf
8b0660016e