54 lines
1.2 KiB
Plaintext
54 lines
1.2 KiB
Plaintext
STMP157-OLinuXino-LIME2
|
|
|
|
Intro
|
|
=====
|
|
|
|
These are open hardware boards, all based on the STmicro STMP157 SoC.
|
|
|
|
for more details about the board see the following pages:
|
|
- https://www.olimex.com/Products/OLinuXino/open-source-hardware
|
|
- https://www.olimex.com/Products/OLinuXino/STMP1/STMP157-OLinuXino-LIME2/
|
|
|
|
The following defconfigs are available:
|
|
- olimex_stmp157_olinuxino_lime_defconfig
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot:
|
|
|
|
$ make <board>_defconfig
|
|
|
|
Compile everything and build the rootfs image:
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
-------------------
|
|
|
|
After building, you should get a tree like this:
|
|
|
|
output/images/
|
|
+-- rootfs.ext2
|
|
+-- rootfs.ext4 -> rootfs.ext2
|
|
+-- sdcard.img
|
|
+-- stm32mp1xx-olinuxino-lime.dtb
|
|
+-- u-boot-spl.stm32
|
|
+-- u-boot.img
|
|
`-- zImage
|
|
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
The sdcard.img file is a complete bootable image ready to be written
|
|
on the boot medium. To install it, simply copy the image to a uSD
|
|
card:
|
|
|
|
# dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Where 'sdX' is the device node of the uSD.
|
|
|
|
Eject the SD card, insert it in the STMP1-OLinuXino board, and power it up.
|
|
|