A13-OLinuXino
Intro
=====
This default configuration will allow you to start experimenting with
the buildroot environment for the A13-OLinuXino. With the current
configuration it will bring-up the board, and allow access through the
serial console.
For more details about the A13-OLinuXino:
https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware
How to build it
===============
Configure Buildroot:
$ make olimex_a13_olinuxino_defconfig
Compile everything and build the rootfs image:
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
The sdcard.img file is a complete bootable image ready to be written
on the boot medium. To install it, simply copy the image to a micro SD
card:
# dd if=output/images/sdcard.img of=/dev/sdX
Notes:
- replace 'sdX' with the actual device with your micro SDcard,
- you may need to be root to do that (use 'sudo').
Eject the SD card, insert it in the A13-OLinuXino board, and power it
up.
chenyf
8b0660016e