77 lines
2.0 KiB
Plaintext
77 lines
2.0 KiB
Plaintext
***************************
|
|
Freescale i.MX8QM MEK board
|
|
***************************
|
|
|
|
This file documents the Buildroot support for the NXP i.MX8QM MEK board.
|
|
|
|
You will find a reference to the board on nxp.com:
|
|
https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-8quadmax-multisensory-enablement-kit-mek:MCIMX8QM-CPU
|
|
|
|
You can also find the get started guide here:
|
|
https://www.nxp.com/document/guide/get-started-with-the-i.mx-8quadmax-mek:GS-iMX-8QM-MEK
|
|
|
|
Build
|
|
=====
|
|
|
|
First, configure Buildroot for the i.MX8QM MEK board:
|
|
|
|
$ make freescale_imx8qmmek_defconfig
|
|
|
|
Build all components:
|
|
|
|
$ make
|
|
|
|
You will find in output/images/ the following files:
|
|
- ahab-container.img
|
|
- bl31.bin
|
|
- boot.vfat
|
|
- fsl-imx8qm-mek.dtb
|
|
- Image
|
|
- imx8-boot-sd.bin
|
|
- mkimg.commit
|
|
- mx8qm-mek-scfw-tcm.bin
|
|
- mx8qm-val-scfw-tcm.bin
|
|
- mx8qm-a0-ddr4-scfw-tcm.bin
|
|
- mx8qm-a0-mek-scfw-tcm.bin
|
|
- mx8qm-a0-val-scfw-tcm.bin
|
|
- mx8qm-ddr4-scfw-tcm.bin
|
|
- rootfs.ext2
|
|
- rootfs.ext4
|
|
- rootfs.tar
|
|
- sdcard.img
|
|
- u-boot-atf.bin
|
|
- u-boot.bin
|
|
- u-boot-hash.bin
|
|
|
|
Create a bootable SD card
|
|
=========================
|
|
|
|
To determine the device associated to the SD card have a look in the
|
|
/proc/partitions file:
|
|
|
|
cat /proc/partitions
|
|
|
|
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
directory, ready to be dumped on a SD card. Launch the following
|
|
command as root:
|
|
|
|
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
|
|
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
|
|
For details about the medium image layout, see the definition in
|
|
board/freescale/common/imx/genimage.cfg.template_imx8.
|
|
|
|
Boot the i.MX8QM MEK board
|
|
==========================
|
|
|
|
To boot your newly created system:
|
|
- insert the SD card in the SD slot of the board;
|
|
- Configure the boot switch as follows:
|
|
SW2: OFF OFF ON ON OFF OFF
|
|
- put a micro USB cable into the Debug USB Port and connect using a terminal
|
|
emulator at 115200 bps, 8n1;
|
|
- power on the board.
|
|
|
|
Enjoy!
|