Intro
=====
This default configuration will allow you to start experimenting with the
Buildroot environment for the Bananapi M2 Zero. With the current configuration
it will bring-up the board, and allow access through the serial console.
Bananapi M2 Zero link:
http://www.banana-pi.org/m2z.html
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make bananapi_m2_zero_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sync
Insert the micro SDcard in your Bananapi M2 Zero and power it up. The console
is on the Debug UART on the CON3 header, with serial settings 115200 8N1.
chenyf
8b0660016e