# Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2021 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# extension/Makefile.am --- automake input file for gawk
#
# Copyright (C) 1995-2006, 2012-2015, 2017, 2020, 2021, 2022,
# the Free Software Foundation, Inc.
#
# This file is part of GAWK, the GNU implementation of the
# AWK Programming Language.
#
# GAWK is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# GAWK is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
#

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../m4/arch.m4 \
	$(top_srcdir)/../m4/codeset.m4 $(top_srcdir)/../m4/dirfd.m4 \
	$(top_srcdir)/../m4/gettext.m4 \
	$(top_srcdir)/../m4/host-cpu-c-abi.m4 \
	$(top_srcdir)/../m4/iconv.m4 $(top_srcdir)/../m4/intlmacosx.m4 \
	$(top_srcdir)/../m4/lcmessage.m4 $(top_srcdir)/../m4/lib-ld.m4 \
	$(top_srcdir)/../m4/lib-link.m4 \
	$(top_srcdir)/../m4/lib-prefix.m4 \
	$(top_srcdir)/../m4/libtool.m4 \
	$(top_srcdir)/../m4/ltoptions.m4 \
	$(top_srcdir)/../m4/ltsugar.m4 \
	$(top_srcdir)/../m4/ltversion.m4 \
	$(top_srcdir)/../m4/lt~obsolete.m4 $(top_srcdir)/../m4/mpfr.m4 \
	$(top_srcdir)/../m4/nls.m4 $(top_srcdir)/../m4/po.m4 \
	$(top_srcdir)/../m4/progtest.m4 \
	$(top_srcdir)/../m4/triplet-transformation.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(pkgextensiondir)" \
	"$(DESTDIR)$(man3dir)"
LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkgextension_LTLIBRARIES)
am__DEPENDENCIES_1 =
am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1)
filefuncs_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_filefuncs_la_OBJECTS = filefuncs.lo stack.lo gawkfts.lo
filefuncs_la_OBJECTS = $(am_filefuncs_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
filefuncs_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(filefuncs_la_LDFLAGS) $(LDFLAGS) -o $@
fnmatch_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_fnmatch_la_OBJECTS = fnmatch.lo
fnmatch_la_OBJECTS = $(am_fnmatch_la_OBJECTS)
fnmatch_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(fnmatch_la_LDFLAGS) $(LDFLAGS) -o $@
fork_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_fork_la_OBJECTS = fork.lo
fork_la_OBJECTS = $(am_fork_la_OBJECTS)
fork_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(fork_la_LDFLAGS) $(LDFLAGS) -o $@
inplace_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_inplace_la_OBJECTS = inplace.lo
inplace_la_OBJECTS = $(am_inplace_la_OBJECTS)
inplace_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(inplace_la_LDFLAGS) $(LDFLAGS) -o $@
intdiv_la_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1)
am_intdiv_la_OBJECTS = intdiv.lo
intdiv_la_OBJECTS = $(am_intdiv_la_OBJECTS)
intdiv_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(intdiv_la_LDFLAGS) $(LDFLAGS) -o $@
ordchr_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_ordchr_la_OBJECTS = ordchr.lo
ordchr_la_OBJECTS = $(am_ordchr_la_OBJECTS)
ordchr_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(ordchr_la_LDFLAGS) $(LDFLAGS) -o $@
readdir_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_readdir_la_OBJECTS = readdir.lo
readdir_la_OBJECTS = $(am_readdir_la_OBJECTS)
readdir_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(readdir_la_LDFLAGS) $(LDFLAGS) -o $@
readdir_test_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_readdir_test_la_OBJECTS = readdir_test.lo
readdir_test_la_OBJECTS = $(am_readdir_test_la_OBJECTS)
readdir_test_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(AM_CFLAGS) $(CFLAGS) $(readdir_test_la_LDFLAGS) $(LDFLAGS) \
	-o $@
readfile_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_readfile_la_OBJECTS = readfile.lo
readfile_la_OBJECTS = $(am_readfile_la_OBJECTS)
readfile_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(readfile_la_LDFLAGS) $(LDFLAGS) -o $@
revoutput_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_revoutput_la_OBJECTS = revoutput.lo
revoutput_la_OBJECTS = $(am_revoutput_la_OBJECTS)
revoutput_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(revoutput_la_LDFLAGS) $(LDFLAGS) -o $@
revtwoway_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_revtwoway_la_OBJECTS = revtwoway.lo
revtwoway_la_OBJECTS = $(am_revtwoway_la_OBJECTS)
revtwoway_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(revtwoway_la_LDFLAGS) $(LDFLAGS) -o $@
rwarray_la_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1)
am_rwarray_la_OBJECTS = rwarray.lo
rwarray_la_OBJECTS = $(am_rwarray_la_OBJECTS)
rwarray_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(rwarray_la_LDFLAGS) $(LDFLAGS) -o $@
testext_la_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1)
am_testext_la_OBJECTS = testext.lo
testext_la_OBJECTS = $(am_testext_la_OBJECTS)
testext_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(testext_la_LDFLAGS) $(LDFLAGS) -o $@
time_la_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_time_la_OBJECTS = time.lo
time_la_OBJECTS = $(am_time_la_OBJECTS)
time_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(time_la_LDFLAGS) $(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../build-aux/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = ./$(DEPDIR)/filefuncs.Plo \
	./$(DEPDIR)/fnmatch.Plo ./$(DEPDIR)/fork.Plo \
	./$(DEPDIR)/gawkfts.Plo ./$(DEPDIR)/inplace.Plo \
	./$(DEPDIR)/intdiv.Plo ./$(DEPDIR)/ordchr.Plo \
	./$(DEPDIR)/readdir.Plo ./$(DEPDIR)/readdir_test.Plo \
	./$(DEPDIR)/readfile.Plo ./$(DEPDIR)/revoutput.Plo \
	./$(DEPDIR)/revtwoway.Plo ./$(DEPDIR)/rwarray.Plo \
	./$(DEPDIR)/stack.Plo ./$(DEPDIR)/testext.Plo \
	./$(DEPDIR)/time.Plo
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = $(filefuncs_la_SOURCES) $(fnmatch_la_SOURCES) \
	$(fork_la_SOURCES) $(inplace_la_SOURCES) $(intdiv_la_SOURCES) \
	$(ordchr_la_SOURCES) $(readdir_la_SOURCES) \
	$(readdir_test_la_SOURCES) $(readfile_la_SOURCES) \
	$(revoutput_la_SOURCES) $(revtwoway_la_SOURCES) \
	$(rwarray_la_SOURCES) $(testext_la_SOURCES) $(time_la_SOURCES)
DIST_SOURCES = $(filefuncs_la_SOURCES) $(fnmatch_la_SOURCES) \
	$(fork_la_SOURCES) $(inplace_la_SOURCES) $(intdiv_la_SOURCES) \
	$(ordchr_la_SOURCES) $(readdir_la_SOURCES) \
	$(readdir_test_la_SOURCES) $(readfile_la_SOURCES) \
	$(revoutput_la_SOURCES) $(revtwoway_la_SOURCES) \
	$(rwarray_la_SOURCES) $(testext_la_SOURCES) $(time_la_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
man3dir = $(mandir)/man3
NROFF = nroff
MANS = $(dist_man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
	configh.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
	$(srcdir)/configh.in $(top_srcdir)/../build-aux/ar-lib \
	$(top_srcdir)/../build-aux/compile \
	$(top_srcdir)/../build-aux/config.guess \
	$(top_srcdir)/../build-aux/config.rpath \
	$(top_srcdir)/../build-aux/config.sub \
	$(top_srcdir)/../build-aux/depcomp \
	$(top_srcdir)/../build-aux/install-sh \
	$(top_srcdir)/../build-aux/ltmain.sh \
	$(top_srcdir)/../build-aux/missing ../build-aux/ChangeLog \
	../build-aux/ar-lib ../build-aux/compile \
	../build-aux/config.guess ../build-aux/config.rpath \
	../build-aux/config.sub ../build-aux/depcomp \
	../build-aux/install-sh ../build-aux/ltmain.sh \
	../build-aux/missing ../build-aux/texinfo.tex \
	../build-aux/ylwrap ABOUT-NLS AUTHORS COPYING ChangeLog \
	INSTALL NEWS README
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBMPFR = @LIBMPFR@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgextensiondir = @pkgextensiondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AM_CPPFLAGS = -I$(srcdir)/..

# This variable insures that aclocal runs
# correctly after changing configure.ac
ACLOCAL_AMFLAGS = -I ../m4

# For some make's, e.g. OpenBSD, that don't define this
RM = rm -f
pkgextension_LTLIBRARIES = \
	filefuncs.la	\
	fnmatch.la	\
	fork.la		\
	inplace.la	\
	intdiv.la	\
	ordchr.la	\
	readdir.la	\
	readfile.la	\
	revoutput.la	\
	revtwoway.la	\
	rwarray.la	\
	time.la

noinst_LTLIBRARIES = \
	readdir_test.la	\
	testext.la

MY_MODULE_FLAGS = -module -avoid-version -no-undefined
# On Cygwin, gettext requires that we link with -lintl
MY_LIBS = $(LTLIBINTL)
filefuncs_la_SOURCES = filefuncs.c stack.h stack.c gawkfts.h \
			gawkfts.c gawkdirfd.h

filefuncs_la_LDFLAGS = $(MY_MODULE_FLAGS)
filefuncs_la_LIBADD = $(MY_LIBS)
fnmatch_la_SOURCES = fnmatch.c
fnmatch_la_LDFLAGS = $(MY_MODULE_FLAGS)
fnmatch_la_LIBADD = $(MY_LIBS)
fork_la_SOURCES = fork.c
fork_la_LDFLAGS = $(MY_MODULE_FLAGS)
fork_la_LIBADD = $(MY_LIBS)
inplace_la_SOURCES = inplace.c
inplace_la_LDFLAGS = $(MY_MODULE_FLAGS)
inplace_la_LIBADD = $(MY_LIBS)

# On Cygwin, intdiv has to be linked with the MPFR and GMP libraries.
# Solaris in addition wants the math library.
intdiv_la_SOURCES = intdiv.c
intdiv_la_LDFLAGS = $(MY_MODULE_FLAGS)
intdiv_la_LIBADD = $(MY_LIBS) $(LIBMPFR) -lm
ordchr_la_SOURCES = ordchr.c
ordchr_la_LDFLAGS = $(MY_MODULE_FLAGS)
ordchr_la_LIBADD = $(MY_LIBS)
readdir_la_SOURCES = readdir.c gawkdirfd.h
readdir_la_LDFLAGS = $(MY_MODULE_FLAGS)
readdir_la_LIBADD = $(MY_LIBS)
readfile_la_SOURCES = readfile.c
readfile_la_LDFLAGS = $(MY_MODULE_FLAGS)
readfile_la_LIBADD = $(MY_LIBS)
revoutput_la_SOURCES = revoutput.c
revoutput_la_LDFLAGS = $(MY_MODULE_FLAGS)
revoutput_la_LIBADD = $(MY_LIBS)
revtwoway_la_SOURCES = revtwoway.c
revtwoway_la_LDFLAGS = $(MY_MODULE_FLAGS)
revtwoway_la_LIBADD = $(MY_LIBS)

# On Cygwin, rwarray has to be linked with the MPFR and GMP libraries.
rwarray_la_SOURCES = rwarray.c
rwarray_la_LDFLAGS = $(MY_MODULE_FLAGS)
rwarray_la_LIBADD = $(MY_LIBS) $(LIBMPFR)
time_la_SOURCES = time.c
time_la_LDFLAGS = $(MY_MODULE_FLAGS)
time_la_LIBADD = $(MY_LIBS)

# N.B. Becaues we are not installing testext, we must specify -rpath in
# LDFLAGS to get automake to build a shared library, since it needs
# an installation path.
# On Cygwin, testext has to be linked with the MPFR and GMP libraries.
testext_la_SOURCES = testext.c
testext_la_LDFLAGS = $(MY_MODULE_FLAGS) -rpath /foo
testext_la_LIBADD = $(MY_LIBS) $(LIBMPFR)

# N.B. Because we are not installing readdir_test, we must specify -rpath in
# LDFLAGS to get automake to build a shared library, since it needs
# an installation path.
readdir_test_la_SOURCES = readdir_test.c
readdir_test_la_LDFLAGS = $(MY_MODULE_FLAGS) -rpath /foo
readdir_test_la_LIBADD = $(MY_LIBS)
EXTRA_DIST = \
	ChangeLog \
	ChangeLog.0 \
	ChangeLog.1 \
	ext_custom.h \
	fts.3 \
	README.fts

dist_man_MANS = \
	filefuncs.3am fnmatch.3am fork.3am inplace.3am \
	ordchr.3am readdir.3am readfile.3am revoutput.3am \
	revtwoway.3am rwarray.3am time.3am


# gettext requires this
SUBDIRS = po
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/configh.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/configh.in:  $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

install-pkgextensionLTLIBRARIES: $(pkgextension_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	@list='$(pkgextension_LTLIBRARIES)'; test -n "$(pkgextensiondir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgextensiondir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgextensiondir)" || exit 1; \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkgextensiondir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkgextensiondir)"; \
	}

uninstall-pkgextensionLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgextension_LTLIBRARIES)'; test -n "$(pkgextensiondir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkgextensiondir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkgextensiondir)/$$f"; \
	done

clean-pkgextensionLTLIBRARIES:
	-test -z "$(pkgextension_LTLIBRARIES)" || rm -f $(pkgextension_LTLIBRARIES)
	@list='$(pkgextension_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

filefuncs.la: $(filefuncs_la_OBJECTS) $(filefuncs_la_DEPENDENCIES) $(EXTRA_filefuncs_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(filefuncs_la_LINK) -rpath $(pkgextensiondir) $(filefuncs_la_OBJECTS) $(filefuncs_la_LIBADD) $(LIBS)

fnmatch.la: $(fnmatch_la_OBJECTS) $(fnmatch_la_DEPENDENCIES) $(EXTRA_fnmatch_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(fnmatch_la_LINK) -rpath $(pkgextensiondir) $(fnmatch_la_OBJECTS) $(fnmatch_la_LIBADD) $(LIBS)

fork.la: $(fork_la_OBJECTS) $(fork_la_DEPENDENCIES) $(EXTRA_fork_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(fork_la_LINK) -rpath $(pkgextensiondir) $(fork_la_OBJECTS) $(fork_la_LIBADD) $(LIBS)

inplace.la: $(inplace_la_OBJECTS) $(inplace_la_DEPENDENCIES) $(EXTRA_inplace_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(inplace_la_LINK) -rpath $(pkgextensiondir) $(inplace_la_OBJECTS) $(inplace_la_LIBADD) $(LIBS)

intdiv.la: $(intdiv_la_OBJECTS) $(intdiv_la_DEPENDENCIES) $(EXTRA_intdiv_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(intdiv_la_LINK) -rpath $(pkgextensiondir) $(intdiv_la_OBJECTS) $(intdiv_la_LIBADD) $(LIBS)

ordchr.la: $(ordchr_la_OBJECTS) $(ordchr_la_DEPENDENCIES) $(EXTRA_ordchr_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(ordchr_la_LINK) -rpath $(pkgextensiondir) $(ordchr_la_OBJECTS) $(ordchr_la_LIBADD) $(LIBS)

readdir.la: $(readdir_la_OBJECTS) $(readdir_la_DEPENDENCIES) $(EXTRA_readdir_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(readdir_la_LINK) -rpath $(pkgextensiondir) $(readdir_la_OBJECTS) $(readdir_la_LIBADD) $(LIBS)

readdir_test.la: $(readdir_test_la_OBJECTS) $(readdir_test_la_DEPENDENCIES) $(EXTRA_readdir_test_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(readdir_test_la_LINK)  $(readdir_test_la_OBJECTS) $(readdir_test_la_LIBADD) $(LIBS)

readfile.la: $(readfile_la_OBJECTS) $(readfile_la_DEPENDENCIES) $(EXTRA_readfile_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(readfile_la_LINK) -rpath $(pkgextensiondir) $(readfile_la_OBJECTS) $(readfile_la_LIBADD) $(LIBS)

revoutput.la: $(revoutput_la_OBJECTS) $(revoutput_la_DEPENDENCIES) $(EXTRA_revoutput_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(revoutput_la_LINK) -rpath $(pkgextensiondir) $(revoutput_la_OBJECTS) $(revoutput_la_LIBADD) $(LIBS)

revtwoway.la: $(revtwoway_la_OBJECTS) $(revtwoway_la_DEPENDENCIES) $(EXTRA_revtwoway_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(revtwoway_la_LINK) -rpath $(pkgextensiondir) $(revtwoway_la_OBJECTS) $(revtwoway_la_LIBADD) $(LIBS)

rwarray.la: $(rwarray_la_OBJECTS) $(rwarray_la_DEPENDENCIES) $(EXTRA_rwarray_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(rwarray_la_LINK) -rpath $(pkgextensiondir) $(rwarray_la_OBJECTS) $(rwarray_la_LIBADD) $(LIBS)

testext.la: $(testext_la_OBJECTS) $(testext_la_DEPENDENCIES) $(EXTRA_testext_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(testext_la_LINK)  $(testext_la_OBJECTS) $(testext_la_LIBADD) $(LIBS)

time.la: $(time_la_OBJECTS) $(time_la_DEPENDENCIES) $(EXTRA_time_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(time_la_LINK) -rpath $(pkgextensiondir) $(time_la_OBJECTS) $(time_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filefuncs.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fnmatch.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fork.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gawkfts.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/inplace.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/intdiv.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ordchr.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readdir.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readdir_test.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readfile.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/revoutput.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/revtwoway.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rwarray.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stack.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testext.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/time.Plo@am__quote@ # am--include-marker

$(am__depfiles_remade):
	@$(MKDIR_P) $(@D)
	@echo '# dummy' >$@-t && $(am__mv) $@-t $@

am--depfiles: $(am__depfiles_remade)

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-man3: $(dist_man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(dist_man_MANS)'; \
	test -n "$(man3dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.3[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
	done; }

uninstall-man3:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man3dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.3[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(LTLIBRARIES) $(MANS) config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(pkgextensiondir)" "$(DESTDIR)$(man3dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
	clean-pkgextensionLTLIBRARIES mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
		-rm -f ./$(DEPDIR)/filefuncs.Plo
	-rm -f ./$(DEPDIR)/fnmatch.Plo
	-rm -f ./$(DEPDIR)/fork.Plo
	-rm -f ./$(DEPDIR)/gawkfts.Plo
	-rm -f ./$(DEPDIR)/inplace.Plo
	-rm -f ./$(DEPDIR)/intdiv.Plo
	-rm -f ./$(DEPDIR)/ordchr.Plo
	-rm -f ./$(DEPDIR)/readdir.Plo
	-rm -f ./$(DEPDIR)/readdir_test.Plo
	-rm -f ./$(DEPDIR)/readfile.Plo
	-rm -f ./$(DEPDIR)/revoutput.Plo
	-rm -f ./$(DEPDIR)/revtwoway.Plo
	-rm -f ./$(DEPDIR)/rwarray.Plo
	-rm -f ./$(DEPDIR)/stack.Plo
	-rm -f ./$(DEPDIR)/testext.Plo
	-rm -f ./$(DEPDIR)/time.Plo
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-local distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-man install-pkgextensionLTLIBRARIES
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man: install-man3

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
		-rm -f ./$(DEPDIR)/filefuncs.Plo
	-rm -f ./$(DEPDIR)/fnmatch.Plo
	-rm -f ./$(DEPDIR)/fork.Plo
	-rm -f ./$(DEPDIR)/gawkfts.Plo
	-rm -f ./$(DEPDIR)/inplace.Plo
	-rm -f ./$(DEPDIR)/intdiv.Plo
	-rm -f ./$(DEPDIR)/ordchr.Plo
	-rm -f ./$(DEPDIR)/readdir.Plo
	-rm -f ./$(DEPDIR)/readdir_test.Plo
	-rm -f ./$(DEPDIR)/readfile.Plo
	-rm -f ./$(DEPDIR)/revoutput.Plo
	-rm -f ./$(DEPDIR)/revtwoway.Plo
	-rm -f ./$(DEPDIR)/rwarray.Plo
	-rm -f ./$(DEPDIR)/stack.Plo
	-rm -f ./$(DEPDIR)/testext.Plo
	-rm -f ./$(DEPDIR)/time.Plo
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-man uninstall-pkgextensionLTLIBRARIES

uninstall-man: uninstall-man3

.MAKE: $(am__recursive_targets) all install-am install-data-am \
	install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--depfiles am--refresh check check-am clean clean-cscope \
	clean-generic clean-libtool clean-noinstLTLIBRARIES \
	clean-pkgextensionLTLIBRARIES cscope cscopelist-am ctags \
	ctags-am dist dist-all dist-bzip2 dist-gzip dist-lzip \
	dist-shar dist-tarZ dist-xz dist-zip dist-zstd distcheck \
	distclean distclean-compile distclean-generic distclean-hdr \
	distclean-libtool distclean-local distclean-tags \
	distcleancheck distdir distuninstallcheck dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-data-hook install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man3 \
	install-pdf install-pdf-am install-pkgextensionLTLIBRARIES \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-am uninstall uninstall-am uninstall-man \
	uninstall-man3 uninstall-pkgextensionLTLIBRARIES

.PRECIOUS: Makefile


install-data-hook:
	for i in $(pkgextension_LTLIBRARIES) ; do \
		$(RM) $(DESTDIR)$(pkgextensiondir)/$$i ; \
	done

# Keep the uninstall check working:
uninstall-so:
	$(RM) $(DESTDIR)$(pkgextensiondir)/*.so
	$(RM) $(DESTDIR)$(pkgextensiondir)/*.dll
	$(RM) $(DESTDIR)$(pkgextensiondir)/*.a
	$(RM) $(DESTDIR)$(pkgextensiondir)/*.lib

uninstall-recursive: uninstall-so

distclean-local:
	rm -fr .deps

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: