------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- C H E C K S -- -- -- -- S p e c -- -- -- -- Copyright (C) 1992-2020, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ -- Package containing routines used to deal with run-time checks. These -- routines are used both by the semantics and by the expander. In some -- cases, checks are enabled simply by setting a flag for the back end, -- and in other cases the code for the check is expanded. -- The approach used for range and length checks, in regards to suppressed -- checks, is to attempt to detect at compilation time that a constraint -- error will occur. If this is detected a warning or error is issued and the -- offending expression or statement replaced with a constraint error node. -- This always occurs whether checks are suppressed or not. Dynamic range -- checks are, of course, not inserted if checks are suppressed. with Errout; use Errout; with Namet; use Namet; with Table; with Types; use Types; with Uintp; use Uintp; with Urealp; use Urealp; package Checks is procedure Initialize; -- Called for each new main source program, to initialize internal -- variables used in the package body of the Checks unit. function Access_Checks_Suppressed (E : Entity_Id) return Boolean; function Accessibility_Checks_Suppressed (E : Entity_Id) return Boolean; function Alignment_Checks_Suppressed (E : Entity_Id) return Boolean; function Allocation_Checks_Suppressed (E : Entity_Id) return Boolean; function Atomic_Synchronization_Disabled (E : Entity_Id) return Boolean; function Discriminant_Checks_Suppressed (E : Entity_Id) return Boolean; function Division_Checks_Suppressed (E : Entity_Id) return Boolean; function Duplicated_Tag_Checks_Suppressed (E : Entity_Id) return Boolean; function Elaboration_Checks_Suppressed (E : Entity_Id) return Boolean; function Index_Checks_Suppressed (E : Entity_Id) return Boolean; function Length_Checks_Suppressed (E : Entity_Id) return Boolean; function Overflow_Checks_Suppressed (E : Entity_Id) return Boolean; function Predicate_Checks_Suppressed (E : Entity_Id) return Boolean; function Range_Checks_Suppressed (E : Entity_Id) return Boolean; function Storage_Checks_Suppressed (E : Entity_Id) return Boolean; function Tag_Checks_Suppressed (E : Entity_Id) return Boolean; -- These functions check to see if the named check is suppressed, either -- by an active scope suppress setting, or because the check has been -- specifically suppressed for the given entity. If no entity is relevant -- for the current check, then Empty is used as an argument. Note: the -- reason we insist on specifying Empty is to force the caller to think -- about whether there is any relevant entity that should be checked. function Is_Check_Suppressed (E : Entity_Id; C : Check_Id) return Boolean; -- This function is called if Checks_May_Be_Suppressed (E) is True to -- determine whether check C is suppressed either on the entity E or -- as the result of a scope suppress pragma. If Checks_May_Be_Suppressed -- is False, then the status of the check can be determined simply by -- examining Scope_Suppress, so this routine is not called in that case. function Overflow_Check_Mode return Overflow_Mode_Type; -- Returns current overflow checking mode, taking into account whether -- we are inside an assertion expression and the assertion policy. ----------------------------------------- -- Control of Alignment Check Warnings -- ----------------------------------------- -- When we have address clauses, there is an issue of whether the address -- specified is appropriate to the alignment. In the general case where the -- address is dynamic, we generate a check and a possible warning (this -- warning occurs for example if we have a restricted runtime with the -- restriction No_Exception_Propagation). We also issue this warning in -- the case where the address is static, but we don't know the alignment -- at the time we process the address clause. In such a case, we issue the -- warning, but we may be able to find out later (after the back end has -- annotated the actual alignment chosen) that the warning was not needed. -- To deal with deleting these potentially annoying warnings, we save the -- warning information in a table, and then delete the warnings in the -- post compilation validation stage if we can tell that the check would -- never fail (in general the back end will also optimize away the check -- in such cases). -- Table used to record information type Alignment_Warnings_Record is record E : Entity_Id; -- Entity whose alignment possibly warrants a warning A : Uint; -- Compile time known value of address clause for which the alignment -- is to be checked once we know the alignment. P : Node_Id; -- Prefix of address clause when it is of the form X'Address W : Error_Msg_Id; -- Id of warning message we might delete end record; package Alignment_Warnings is new Table.Table ( Table_Component_Type => Alignment_Warnings_Record, Table_Index_Type => Int, Table_Low_Bound => 0, Table_Initial => 10, Table_Increment => 200, Table_Name => "Alignment_Warnings"); procedure Validate_Alignment_Check_Warnings; -- This routine is called after back annotation of type data to delete any -- alignment warnings that turn out to be false alarms, based on knowing -- the actual alignment, and a compile-time known alignment value. ------------------------------------------- -- Procedures to Activate Checking Flags -- ------------------------------------------- procedure Activate_Division_Check (N : Node_Id); pragma Inline (Activate_Division_Check); -- Sets Do_Division_Check flag in node N, and handles possible local raise. -- Always call this routine rather than calling Set_Do_Division_Check to -- set an explicit value of True, to ensure handling the local raise case. procedure Activate_Overflow_Check (N : Node_Id); pragma Inline (Activate_Overflow_Check); -- Sets Do_Overflow_Check flag in node N, and handles possible local raise. -- Always call this routine rather than calling Set_Do_Overflow_Check to -- set an explicit value of True, to ensure handling the local raise case. -- Note that for discrete types, this call has no effect for MOD, REM, and -- unary "+" for which overflow is never possible in any case. -- -- Note: for the discrete-type case, it is legitimate to call this routine -- on an unanalyzed node where the Etype field is not set. However, for the -- floating-point case, Etype must be set (to a floating-point type). -- -- For floating-point, we set the flag if we have automatic overflow checks -- on the target, or if Check_Float_Overflow mode is set. For the floating- -- point case, we ignore all the unary operators ("+", "-", and abs) since -- none of these can result in overflow. If there are no overflow checks on -- the target, and Check_Float_Overflow mode is not set, then the call has -- no effect, since in such cases we want to generate NaN's and infinities. procedure Activate_Range_Check (N : Node_Id); pragma Inline (Activate_Range_Check); -- Sets Do_Range_Check flag in node N, and handles possible local raise. -- Always call this routine rather than calling Set_Do_Range_Check to -- set an explicit value of True, to ensure handling the local raise case. -------------------------------- -- Procedures to Apply Checks -- -------------------------------- -- General note on following checks. These checks are always active if -- Expander_Active and not Inside_A_Generic. They are inactive and have -- no effect Inside_A_Generic. In the case where not Expander_Active -- and not Inside_A_Generic, most of them are inactive, but some of them -- operate anyway since they may generate useful compile time warnings. procedure Apply_Access_Check (N : Node_Id); -- Determines whether an expression node requires a run-time access -- check and if so inserts the appropriate run-time check. procedure Apply_Accessibility_Check (N : Node_Id; Typ : Entity_Id; Insert_Node : Node_Id); -- Given a name N denoting an access parameter, emits a run-time -- accessibility check (if necessary), checking that the level of -- the object denoted by the access parameter is not deeper than the -- level of the type Typ. Program_Error is raised if the check fails. -- Insert_Node indicates the node where the check should be inserted. procedure Apply_Address_Clause_Check (E : Entity_Id; N : Node_Id); -- E is the entity for an object which has an address clause. If checks -- are enabled, then this procedure generates a check that the specified -- address has an alignment consistent with the alignment of the object, -- raising PE if this is not the case. The resulting check (if one is -- generated) is prepended to the Actions list of N_Freeze_Entity node N. -- Note that the check references E'Alignment, so it cannot be emitted -- before N (its freeze node), otherwise this would cause an illegal -- access before elaboration error in gigi. For the case of a clear overlay -- situation, we also check that the size of the overlaying object is not -- larger than the overlaid object. procedure Apply_Arithmetic_Overflow_Check (N : Node_Id); -- Handle overflow checking for an arithmetic operator. Also handles the -- cases of ELIMINATED and MINIMIZED overflow checking mode. If the mode -- is one of the latter two, then this routine can also be called with -- an if or case expression node to make sure that we properly handle -- overflow checking for dependent expressions. This routine handles -- front end vs back end overflow checks (in the front end case it expands -- the necessary check). Note that divide is handled separately using -- Apply_Divide_Checks. Node N may or may not have Do_Overflow_Check. -- In STRICT mode, there is nothing to do if this flag is off, but in -- MINIMIZED/ELIMINATED mode we still have to deal with possible use -- of doing operations in Long_Long_Integer or Bignum mode. procedure Apply_Constraint_Check (N : Node_Id; Typ : Entity_Id; No_Sliding : Boolean := False); -- Top-level procedure, calls all the others depending on the class of -- Typ. Checks that expression N satisfies the constraint of type Typ. -- No_Sliding is only relevant for constrained array types, if set to -- True, it checks that indexes are in range. procedure Apply_Discriminant_Check (N : Node_Id; Typ : Entity_Id; Lhs : Node_Id := Empty); -- Given an expression N of a discriminated type, or of an access type -- whose designated type is a discriminanted type, generates a check to -- ensure that the expression can be converted to the subtype given as -- the second parameter. Lhs is empty except in the case of assignments, -- where the target object may be needed to determine the subtype to -- check against (such as the cases of unconstrained formal parameters -- and unconstrained aliased objects). For the case of unconstrained -- formals, the check is performed only if the corresponding actual is -- constrained, i.e., whether Lhs'Constrained is True. procedure Apply_Divide_Checks (N : Node_Id); -- The node kind is N_Op_Divide, N_Op_Mod, or N_Op_Rem if either of the -- flags Do_Division_Check or Do_Overflow_Check is set, then this routine -- ensures that the appropriate checks are made. Note that overflow can -- occur in the signed case for the case of the largest negative number -- divided by minus one. This procedure only applies to Integer types. procedure Apply_Parameter_Aliasing_Checks (Call : Node_Id; Subp : Entity_Id); -- Given a subprogram call Call, add a check to verify that none of the -- actuals overlap. Subp denotes the subprogram being called. procedure Apply_Parameter_Validity_Checks (Subp : Entity_Id); -- Given a subprogram Subp, add both a pre and post condition pragmas that -- verify the proper initialization of scalars in parameters and function -- results. procedure Apply_Predicate_Check (N : Node_Id; Typ : Entity_Id; Fun : Entity_Id := Empty); -- N is an expression to which a predicate check may need to be applied for -- Typ, if Typ has a predicate function. When N is an actual in a call, Fun -- is the function being called, which is used to generate a better warning -- if the call leads to an infinite recursion. procedure Apply_Type_Conversion_Checks (N : Node_Id); -- N is an N_Type_Conversion node. A type conversion actually involves -- two sorts of checks. The first check is the checks that ensures that -- the operand in the type conversion fits onto the base type of the -- subtype it is being converted to (see RM 4.6 (28)-(50)). The second -- check is there to ensure that once the operand has been converted to -- a value of the target type, this converted value meets the -- constraints imposed by the target subtype (see RM 4.6 (51)). procedure Apply_Universal_Integer_Attribute_Checks (N : Node_Id); -- The argument N is an attribute reference node intended for processing -- by gigi. The attribute is one that returns a universal integer, but -- the attribute reference node is currently typed with the expected -- result type. This routine deals with range and overflow checks needed -- to make sure that the universal result is in range. function Build_Discriminant_Checks (N : Node_Id; T_Typ : Entity_Id) return Node_Id; -- Subsidiary routine for Apply_Discriminant_Check. Builds the expression -- that compares discriminants of the expression with discriminants of the -- type. Also used directly for membership tests (see Exp_Ch4.Expand_N_In). function Convert_From_Bignum (N : Node_Id) return Node_Id; -- Returns result of converting node N from Bignum. The returned value is -- not analyzed, the caller takes responsibility for this. Node N must be -- a subexpression node of type Bignum. The result is Long_Long_Integer. function Convert_To_Bignum (N : Node_Id) return Node_Id; -- Returns result of converting node N to Bignum. The returned value is not -- analyzed, the caller takes responsibility for this. Node N must be a -- subexpression node of a signed integer type or Bignum type (if it is -- already a Bignum, the returned value is Relocate_Node (N)). procedure Determine_Range (N : Node_Id; OK : out Boolean; Lo : out Uint; Hi : out Uint; Assume_Valid : Boolean := False); -- N is a node for a subexpression. If N is of a discrete type with no -- error indications, and no other peculiarities (e.g. missing Etype), -- then OK is True on return, and Lo and Hi are set to a conservative -- estimate of the possible range of values of N. Thus if OK is True on -- return, the value of the subexpression N is known to lie in the range -- Lo .. Hi (inclusive). For enumeration and character literals the values -- returned are the Pos value in the relevant enumeration type. If the -- expression is not of a discrete type, or some kind of error condition -- is detected, then OK is False on exit, and Lo/Hi are set to No_Uint. -- Thus the significance of OK being False on return is that no useful -- information is available on the range of the expression. Assume_Valid -- determines whether the processing is allowed to assume that values are -- in range of their subtypes. If it is set to True, then this assumption -- is valid, if False, then processing is done using base types to allow -- invalid values. procedure Determine_Range_R (N : Node_Id; OK : out Boolean; Lo : out Ureal; Hi : out Ureal; Assume_Valid : Boolean := False); -- Similar to Determine_Range, but for a node N of floating-point type. OK -- is True on return only for IEEE floating-point types and only if we do -- not have to worry about extended precision (i.e. on the x86, we must be -- using -msse2 -mfpmath=sse). At the current time, this is used only in -- GNATprove, though we could consider using it more generally in future. -- For that to happen, the possibility of arguments of infinite or NaN -- value should be taken into account, which is not the case currently. procedure Determine_Range_To_Discrete (N : Node_Id; OK : out Boolean; Lo : out Uint; Hi : out Uint; Fixed_Int : Boolean := False; Assume_Valid : Boolean := False); -- Similar to Determine_Range, but attempts to return a discrete range even -- if N is not of a discrete type by doing a conversion. The Fixed_Int flag -- if set causes any fixed-point values to be treated as though they were -- discrete values (i.e. the underlying integer value is used), in which -- case no conversion is needed. At the current time, this is used only for -- discrete types, for fixed-point types if Fixed_Int is set, and also for -- floating-point types in GNATprove, see Determine_Range_R above. procedure Install_Null_Excluding_Check (N : Node_Id); -- Determines whether an access node requires a run-time access check and -- if so inserts the appropriate run-time check. procedure Install_Primitive_Elaboration_Check (Subp_Body : Node_Id); -- Insert a check which ensures that subprogram body Subp_Body has been -- properly elaborated. The check is installed only when Subp_Body is the -- body of a nonabstract library-level primitive of a tagged type. Further -- restrictions may apply, see the body for details. function Make_Bignum_Block (Loc : Source_Ptr) return Node_Id; -- This function is used by top level overflow checking routines to do a -- mark/release operation on the secondary stack around bignum operations. -- The block created looks like: -- -- declare -- M : Mark_Id := SS_Mark; -- begin -- SS_Release (M); -- end; -- -- The idea is that the caller will insert any needed extra declarations -- after the declaration of M, and any needed statements (in particular -- the bignum operations) before the call to SS_Release, and then do an -- Insert_Action of the whole block (it is returned unanalyzed). The Loc -- parameter is used to supply Sloc values for the constructed tree. procedure Minimize_Eliminate_Overflows (N : Node_Id; Lo : out Uint; Hi : out Uint; Top_Level : Boolean); -- This is the main routine for handling MINIMIZED and ELIMINATED overflow -- processing. On entry N is a node whose result is a signed integer -- subtype. The Do_Overflow_Check flag may or may not be set on N. If the -- node is an arithmetic operation, then a range analysis is carried out, -- and there are three possibilities: -- -- The node is left unchanged (apart from expansion of an exponentiation -- operation). This happens if the routine can determine that the result -- is definitely in range. The Do_Overflow_Check flag is turned off in -- this case. -- -- The node is transformed into an arithmetic operation with a result -- type of Long_Long_Integer. -- -- The node is transformed into a function call that calls an appropriate -- function in the System.Bignums package to compute a Bignum result. -- -- In the first two cases, Lo and Hi are set to the bounds of the possible -- range of results, computed as accurately as possible. In the third case -- Lo and Hi are set to No_Uint (there are some cases where we could get an -- advantage from keeping result ranges for Bignum values, but it could use -- a lot of space and is very unlikely to be valuable). -- -- If the node is not an arithmetic operation, then it is unchanged but -- Lo and Hi are still set (to the bounds of the result subtype if nothing -- better can be determined). -- -- Note: this function is recursive, if called with an arithmetic operator, -- recursive calls are made to process the operands using this procedure. -- So we end up doing things top down. Nothing happens to an arithmetic -- expression until this procedure is called on the top level node and -- then the recursive calls process all the children. We have to do it -- this way. If we try to do it bottom up in natural expansion order, then -- there are two problems. First, where do we stash the bounds, and more -- importantly, semantic processing will be messed up. Consider A+B+C where -- A,B,C are all of type integer, if we processed A+B before doing semantic -- analysis of the addition of this result to C, that addition could end up -- with a Long_Long_Integer left operand and an Integer right operand, and -- we would get a semantic error. -- -- The routine is called in three situations if we are operating in either -- MINIMIZED or ELIMINATED modes. -- -- Overflow processing applied to the top node of an expression tree when -- that node is an arithmetic operator. In this case the result is -- converted to the appropriate result type (there is special processing -- when the parent is a conversion, see body for details). -- -- Overflow processing applied to the operands of a comparison operation. -- In this case, the comparison is done on the result Long_Long_Integer -- or Bignum values, without raising any exceptions. -- -- Overflow processing applied to the left operand of a membership test. -- In this case no exception is raised if a Long_Long_Integer or Bignum -- result is outside the range of the type of that left operand (it is -- just that the result of IN is false in that case). -- -- Note that if Bignum values appear, the caller must take care of doing -- the appropriate mark/release operations on the secondary stack. -- -- Top_Level is used to avoid inefficient unnecessary transitions into the -- Bignum domain. If Top_Level is True, it means that the caller will have -- to convert any Bignum value back to Long_Long_Integer, possibly checking -- that the value is in range. This is the normal case for a top level -- operator in a subexpression. There is no point in going into Bignum mode -- to avoid an overflow just so we can check for overflow the next moment. -- For calls from comparisons and membership tests, and for all recursive -- calls, we do want to transition into the Bignum domain if necessary. -- Note that this setting is only relevant in ELIMINATED mode. ------------------------------------------------------- -- Control and Optimization of Range/Overflow Checks -- ------------------------------------------------------- -- Range checks are controlled by the Do_Range_Check flag. The front end -- is responsible for setting this flag in relevant nodes. Originally the -- back end generated all the corresponding range checks, but later on we -- decided to generate all the range checks in the front end and this is -- the current situation. -- Overflow checks are similarly controlled by the Do_Overflow_Check flag. -- The difference here is that if back end overflow checks are inactive -- (Backend_Overflow_Checks_On_Target set False), then the actual overflow -- checks are generated by the front end, but if back end overflow checks -- are active (Backend_Overflow_Checks_On_Target set True), then the back -- end does generate the checks. -- The following two routines are used to set these flags, they allow -- for the possibility of eliminating checks. Checks can be eliminated -- if an identical check has already been performed. procedure Enable_Overflow_Check (N : Node_Id); -- First this routine determines if an overflow check is needed by doing -- an appropriate range check. If a check is not needed, then the call -- has no effect. If a check is needed then this routine sets the flag -- Do_Overflow_Check in node N to True, unless it can be determined that -- the check is not needed. The only condition under which this is the -- case is if there was an identical check earlier on. procedure Enable_Range_Check (N : Node_Id); -- Set Do_Range_Check flag in node N True, unless it can be determined -- that the check is not needed. The only condition under which this is -- the case is if there was an identical check earlier on. This routine -- is not responsible for doing range analysis to determine whether or -- not such a check is needed -- the caller is expected to do this. The -- one other case in which the request to set the flag is ignored is -- when Kill_Range_Check is set in an N_Unchecked_Conversion node. -- The following routines are used to keep track of processing sequences -- of statements (e.g. the THEN statements of an IF statement). A check -- that appears within such a sequence can eliminate an identical check -- within this sequence of statements. However, after the end of the -- sequence of statements, such a check is no longer of interest, since -- it may not have been executed. procedure Conditional_Statements_Begin; -- This call marks the start of processing of a sequence of statements. -- Every call to this procedure must be followed by a matching call to -- Conditional_Statements_End. procedure Conditional_Statements_End; -- This call removes from consideration all saved checks since the -- corresponding call to Conditional_Statements_Begin. These two -- procedures operate in a stack like manner. -- The mechanism for optimizing checks works by remembering checks -- that have already been made, but certain conditions, for example -- an assignment to a variable involved in a check, may mean that the -- remembered check is no longer valid, in the sense that if the same -- expression appears again, another check is required because the -- value may have changed. -- The following routines are used to note conditions which may render -- some or all of the stored and remembered checks to be invalidated. procedure Kill_Checks (V : Entity_Id); -- This procedure records an assignment or other condition that causes -- the value of the variable to be changed, invalidating any stored -- checks that reference the value. Note that all such checks must -- be discarded, even if they are not in the current statement range. procedure Kill_All_Checks; -- This procedure kills all remembered checks ----------------------------- -- Length and Range Checks -- ----------------------------- -- In the following procedures, there are three arguments which have -- a common meaning as follows: -- Expr The expression to be checked. If a check is required, -- the appropriate flag will be placed on this node. Whether -- this node is further examined depends on the setting of -- the parameter Source_Typ, as described below. -- Target_Typ The target type on which the check is to be based. For -- example, if we have a scalar range check, then the check -- is that we are in range of this type. -- Source_Typ Normally Empty, but can be set to a type, in which case -- this type is used for the check, see below. -- The checks operate in one of two modes: -- If Source_Typ is Empty, then the node Expr is examined, at the very -- least to get the source subtype. In addition for some of the checks, -- the actual form of the node may be examined. For example, a node of -- type Integer whose actual form is an Integer conversion from a type -- with range 0 .. 3 can be determined to have a value in range 0 .. 3. -- If Source_Typ is given, then nothing can be assumed about the Expr, -- and indeed its contents are not examined. In this case the check is -- based on the assumption that Expr can be an arbitrary value of the -- given Source_Typ. -- Currently, the only case in which a Source_Typ is explicitly supplied -- is for the case of Out and In_Out parameters, where, for the conversion -- on return (the Out direction), the types must be reversed. This is -- handled by the caller. procedure Apply_Length_Check (Expr : Node_Id; Target_Typ : Entity_Id; Source_Typ : Entity_Id := Empty); -- This procedure builds a sequence of declarations to do a length check -- that checks if the lengths of the two arrays Target_Typ and source type -- are the same. The resulting actions are inserted at Node using a call -- to Insert_Actions. -- -- For access types, the Directly_Designated_Type is retrieved and -- processing continues as enumerated above, with a guard against null -- values. -- -- Note: calls to Apply_Length_Check currently never supply an explicit -- Source_Typ parameter, but Apply_Length_Check takes this parameter and -- processes it as described above for consistency with the other routines -- in this section. procedure Apply_Length_Check_On_Assignment (Expr : Node_Id; Target_Typ : Entity_Id; Target : Node_Id; Source_Typ : Entity_Id := Empty); -- Similar to Apply_Length_Check, but takes the target of an assignment for -- which the check is to be done. Used to filter out specific cases where -- the check is superfluous. procedure Apply_Static_Length_Check (Expr : Node_Id; Target_Typ : Entity_Id; Source_Typ : Entity_Id := Empty); -- Tries to determine statically whether the two array types source type -- and Target_Typ have the same length. If it can be determined at compile -- time that they do not, then an N_Raise_Constraint_Error node replaces -- Expr, and a warning message is issued. procedure Apply_Range_Check (Expr : Node_Id; Target_Typ : Entity_Id; Source_Typ : Entity_Id := Empty; Insert_Node : Node_Id := Empty); -- For a Node of kind N_Range, constructs a range check action that tests -- first that the range is not null and then that the range is contained in -- the Target_Typ range. -- -- For scalar types, constructs a range check action that first tests that -- the expression is contained in the Target_Typ range. The difference -- between this and Apply_Scalar_Range_Check is that the latter generates -- the actual checking code against the Etype of the expression. -- -- For constrained array types, construct series of range check actions -- to check that each Expr range is properly contained in the range of -- Target_Typ. -- -- For a type conversion to an unconstrained array type, constructs a range -- check action to check that the bounds of the source type are within the -- constraints imposed by the Target_Typ. -- -- For access types, the Directly_Designated_Type is retrieved and -- processing continues as enumerated above, with a guard against null -- values. -- -- The source type is used by type conversions to unconstrained array -- types to retrieve the corresponding bounds. -- Insert_Node indicates the node where the check should be inserted. -- If it is empty, then the check is inserted directly at Expr instead. procedure Apply_Scalar_Range_Check (Expr : Node_Id; Target_Typ : Entity_Id; Source_Typ : Entity_Id := Empty; Fixed_Int : Boolean := False); -- For scalar types, determines whether an expression node should be -- flagged as needing a run-time range check. If the node requires such a -- check, the Do_Range_Check flag is turned on. The Fixed_Int flag if set -- causes any fixed-point values to be treated as though they were discrete -- values (i.e. the underlying integer value is used). type Check_Result is private; -- Type used to return result of Get_Range_Checks call, for later use in -- call to Insert_Range_Checks procedure. function Get_Range_Checks (Expr : Node_Id; Target_Typ : Entity_Id; Source_Typ : Entity_Id := Empty; Warn_Node : Node_Id := Empty) return Check_Result; -- Like Apply_Range_Check, except it does not modify anything. Instead -- it returns an encapsulated result of the check operations for later -- use in a call to Insert_Range_Checks. If Warn_Node is non-empty, its -- Sloc is used, in the static case, for the generated warning or error. -- Additionally, it is used rather than Expr (or Low/High_Bound of Expr) -- in constructing the check. procedure Append_Range_Checks (Checks : Check_Result; Stmts : List_Id; Suppress_Typ : Entity_Id; Static_Sloc : Source_Ptr); -- Called to append range checks as returned by a call to Get_Range_Checks. -- Stmts is a list to which either the dynamic check is appended or the -- raise Constraint_Error statement is appended (for static checks). -- Suppress_Typ is the type to check to determine if checks are suppressed. -- Static_Sloc is the Sloc at which the raise CE node points. procedure Insert_Range_Checks (Checks : Check_Result; Node : Node_Id; Suppress_Typ : Entity_Id; Static_Sloc : Source_Ptr; Do_Before : Boolean := False); -- Called to insert range checks as returned by a call to Get_Range_Checks. -- Node is the node after which either the dynamic check is inserted or -- the raise Constraint_Error statement is inserted (for static checks). -- Suppress_Typ is the type to check to determine if checks are suppressed. -- Static_Sloc is the Sloc at which the raise CE node points. Normally the -- checks are inserted after Node; if Do_Before is True, they are before. ----------------------- -- Expander Routines -- ----------------------- -- In most cases, the processing for range checks done by semantic analysis -- only results in setting the Do_Range_Check flag, rather than actually -- generating checks. The following routines must be called later on in the -- expansion process upon seeing the Do_Range_Check flag; they generate the -- actual checks and reset the flag. The remaining cases where range checks -- are still directly generated during semantic analysis occur as part of -- the processing of constraints in (sub)type and object declarations. procedure Generate_Range_Check (N : Node_Id; Target_Type : Entity_Id; Reason : RT_Exception_Code); -- This procedure is called to actually generate and insert a range check. -- A check is generated to ensure that the value of N lies within the range -- of the target type. Note that the base type of N may be different from -- the base type of the target type. This happens in the conversion case. -- The Reason parameter is the exception code to be used for the exception -- if raised. -- -- Note: if the expander is not active, or if we are in GNATprove mode, -- then we do not generate explicit range checks. Instead we just turn the -- Do_Range_Check flag on, since in these cases that's what we want to see -- in the tree (GNATprove in particular depends on this flag being set). If -- we generate the actual range checks, then we make sure the flag is off -- afterward, since the code we generate takes complete care of the checks. -- -- Historical note: We used to just pass on the Do_Range_Check flag to the -- back end to generate the check, but now in code-generation mode we never -- have this flag set, since the front end takes care of the check. The -- normal processing flow now is that the analyzer typically turns on the -- Do_Range_Check flag, and if it is set, this routine is called, which -- turns the flag off in code-generation mode. procedure Generate_Index_Checks (N : Node_Id); -- This procedure is called to generate index checks on the subscripts for -- the indexed component node N. Each subscript expression is examined, and -- if the Do_Range_Check flag is set, an appropriate index check is -- generated and the flag is reset. -- Similarly, we set the flag Do_Discriminant_Check in the semantic -- analysis to indicate that a discriminant check is required for selected -- component of a discriminated type. The following routine is called from -- the expander to actually generate the call. procedure Generate_Discriminant_Check (N : Node_Id); -- N is a selected component for which a discriminant check is required to -- make sure that the discriminants have appropriate values for the -- selection. This is done by calling the appropriate discriminant checking -- routine for the selector. ----------------------- -- Validity Checking -- ----------------------- -- In (RM 13.9.1(9-11)) we have the following rules on invalid values -- If the representation of a scalar object does not represent value of -- the object's subtype (perhaps because the object was not initialized), -- the object is said to have an invalid representation. It is a bounded -- error to evaluate the value of such an object. If the error is -- detected, either Constraint_Error or Program_Error is raised. -- Otherwise, execution continues using the invalid representation. The -- rules of the language outside this subclause assume that all objects -- have valid representations. The semantics of operations on invalid -- representations are as follows: -- -- 10 If the representation of the object represents a value of the -- object's type, the value of the type is used. -- -- 11 If the representation of the object does not represent a value -- of the object's type, the semantics of operations on such -- representations is implementation-defined, but does not by -- itself lead to erroneous or unpredictable execution, or to -- other objects becoming abnormal. -- We quote the rules in full here since they are quite delicate. Most -- of the time, we can just compute away with wrong values, and get a -- possibly wrong result, which is well within the range of allowed -- implementation defined behavior. The two tricky cases are subscripted -- array assignments, where we don't want to do wild stores, and case -- statements where we don't want to do wild jumps. -- In GNAT, we control validity checking with a switch -gnatV that can take -- three parameters, n/d/f for None/Default/Full. These modes have the -- following meanings: -- None (no validity checking) -- In this mode, there is no specific checking for invalid values -- and the code generator assumes that all stored values are always -- within the bounds of the object subtype. The consequences are as -- follows: -- For case statements, an out of range invalid value will cause -- Constraint_Error to be raised, or an arbitrary one of the case -- alternatives will be executed. Wild jumps cannot result even -- in this mode, since we always do a range check -- For subscripted array assignments, wild stores will result in -- the expected manner when addresses are calculated using values -- of subscripts that are out of range. -- It could perhaps be argued that this mode is still conformant with -- the letter of the RM, since implementation defined is a rather -- broad category, but certainly it is not in the spirit of the -- RM requirement, since wild stores certainly seem to be a case of -- erroneous behavior. -- Default (default standard RM-compatible validity checking) -- In this mode, which is the default, minimal validity checking is -- performed to ensure no erroneous behavior as follows: -- For case statements, an out of range invalid value will cause -- Constraint_Error to be raised. -- For subscripted array assignments, invalid out of range -- subscript values will cause Constraint_Error to be raised. -- Full (Full validity checking) -- In this mode, the protections guaranteed by the standard mode are -- in place, and the following additional checks are made: -- For every assignment, the right side is checked for validity -- For every call, IN and IN OUT parameters are checked for validity -- For every subscripted array reference, both for stores and loads, -- all subscripts are checked for validity. -- These checks are not required by the RM, but will in practice -- improve the detection of uninitialized variables, particularly -- if used in conjunction with pragma Normalize_Scalars. -- In the above description, we talk about performing validity checks, -- but we don't actually generate a check in a case where the compiler -- can be sure that the value is valid. Note that this assurance must -- be achieved without assuming that any uninitialized value lies within -- the range of its type. The following are cases in which values are -- known to be valid. The flag Is_Known_Valid is used to keep track of -- some of these cases. -- If all possible stored values are valid, then any uninitialized -- value must be valid. -- Literals, including enumeration literals, are clearly always valid -- Constants are always assumed valid, with a validity check being -- performed on the initializing value where necessary to ensure that -- this is the case. -- For variables, the status is set to known valid if there is an -- initializing expression. Again a check is made on the initializing -- value if necessary to ensure that this assumption is valid. The -- status can change as a result of local assignments to a variable. -- If a known valid value is unconditionally assigned, then we mark -- the left side as known valid. If a value is assigned that is not -- known to be valid, then we mark the left side as invalid. This -- kind of processing does NOT apply to non-local variables since we -- are not following the flow graph (more properly the flow of actual -- processing only corresponds to the flow graph for local assignments). -- For non-local variables, we preserve the current setting, i.e. a -- validity check is performed when assigning to a knonwn valid global. -- Note: no validity checking is required if range checks are suppressed -- regardless of the setting of the validity checking mode. -- The following procedures are used in handling validity checking procedure Apply_Subscript_Validity_Checks (Expr : Node_Id); -- Expr is the node for an indexed component. If validity checking and -- range checking are enabled, all subscripts for this indexed component -- are checked for validity. procedure Check_Valid_Lvalue_Subscripts (Expr : Node_Id); -- Expr is a lvalue, i.e. an expression representing the target of an -- assignment. This procedure checks for this expression involving an -- assignment to an array value. We have to be sure that all the subscripts -- in such a case are valid, since according to the rules in (RM -- 13.9.1(9-11)) such assignments are not permitted to result in erroneous -- behavior in the case of invalid subscript values. procedure Ensure_Valid (Expr : Node_Id; Holes_OK : Boolean := False; Related_Id : Entity_Id := Empty; Is_Low_Bound : Boolean := False; Is_High_Bound : Boolean := False); -- Ensure that Expr represents a valid value of its type. If this type -- is not a scalar type, then the call has no effect, since validity -- is only an issue for scalar types. The effect of this call is to -- check if the value is known valid, if so, nothing needs to be done. -- If this is not known, then either Expr is set to be range checked, -- or specific checking code is inserted so that an exception is raised -- if the value is not valid. -- -- The optional argument Holes_OK indicates whether it is necessary to -- worry about enumeration types with non-standard representations leading -- to "holes" in the range of possible representations. If Holes_OK is -- True, then such values are assumed valid (this is used when the caller -- will make a separate check for this case anyway). If Holes_OK is False, -- then this case is checked, and code is inserted to ensure that Expr is -- valid, raising Constraint_Error if the value is not valid. -- -- Related_Id denotes the entity of the context where Expr appears. Flags -- Is_Low_Bound and Is_High_Bound specify whether the expression to check -- is the low or the high bound of a range. These three optional arguments -- signal Remove_Side_Effects to create an external symbol of the form -- Chars (Related_Id)_FIRST/_LAST. For suggested use of these parameters -- see the warning in the body of Sem_Ch3.Process_Range_Expr_In_Decl. function Expr_Known_Valid (Expr : Node_Id) return Boolean; -- This function tests it the value of Expr is known to be valid in the -- sense of RM 13.9.1(9-11). In the case of GNAT, it is only discrete types -- which are a concern, since for non-discrete types we simply continue -- computation with invalid values, which does not lead to erroneous -- behavior. Thus Expr_Known_Valid always returns True if the type of Expr -- is non-discrete. For discrete types the value returned is True only if -- it can be determined that the value is Valid. Otherwise False is -- returned. procedure Insert_Valid_Check (Expr : Node_Id; Related_Id : Entity_Id := Empty; Is_Low_Bound : Boolean := False; Is_High_Bound : Boolean := False); -- Inserts code that will check for the value of Expr being valid, in the -- sense of the 'Valid attribute returning True. Constraint_Error will be -- raised if the value is not valid. -- -- Related_Id denotes the entity of the context where Expr appears. Flags -- Is_Low_Bound and Is_High_Bound specify whether the expression to check -- is the low or the high bound of a range. These three optional arguments -- signal Remove_Side_Effects to create an external symbol of the form -- Chars (Related_Id)_FIRST/_LAST. For suggested use of these parameters -- see the warning in the body of Sem_Ch3.Process_Range_Expr_In_Decl. procedure Null_Exclusion_Static_Checks (N : Node_Id; Comp : Node_Id := Empty; Array_Comp : Boolean := False); -- Ada 2005 (AI-231): Test for and warn on null-excluding objects or -- components that will raise an exception due to initialization by null. -- -- When a value for Comp is supplied (as in the case of an uninitialized -- null-excluding component within a composite object), a reported warning -- will indicate the offending component instead of the object itself. -- Array_Comp being True indicates an array object with null-excluding -- components, and any reported warning will indicate that. procedure Remove_Checks (Expr : Node_Id); -- Remove all checks from Expr except those that are only executed -- conditionally (on the right side of And Then/Or Else. This call -- removes only embedded checks (Do_Range_Check, Do_Overflow_Check). procedure Validity_Check_Range (N : Node_Id; Related_Id : Entity_Id := Empty); -- If N is an N_Range node, then Ensure_Valid is called on its bounds, if -- validity checking of operands is enabled. Related_Id denotes the entity -- of the context where N appears. ----------------------------- -- Handling of Check Names -- ----------------------------- -- The following table contains Name_Id's for recognized checks. The first -- entries (corresponding to the values of the subtype Predefined_Check_Id) -- contain the Name_Id values for the checks that are predefined, including -- All_Checks (see Types). Remaining entries are those that are introduced -- by pragma Check_Names. package Check_Names is new Table.Table ( Table_Component_Type => Name_Id, Table_Index_Type => Check_Id, Table_Low_Bound => 1, Table_Initial => 30, Table_Increment => 200, Table_Name => "Name_Check_Names"); function Get_Check_Id (N : Name_Id) return Check_Id; -- Function to search above table for matching name. If found returns the -- corresponding Check_Id value in the range 1 .. Check_Name.Last. If not -- found returns No_Check_Id. private type Check_Result is array (Positive range 1 .. 2) of Node_Id; -- There are two cases for the result returned by Range_Check: -- -- For the static case the result is one or two nodes that should cause -- a Constraint_Error. Typically these will include Expr itself or the -- direct descendants of Expr, such as Low/High_Bound (Expr)). It is the -- responsibility of the caller to rewrite and substitute the nodes with -- N_Raise_Constraint_Error nodes. -- -- For the non-static case a single N_Raise_Constraint_Error node with a -- non-empty Condition field is returned. -- -- Unused entries in Check_Result, if any, are simply set to Empty For -- external clients, the required processing on this result is achieved -- using the Insert_Range_Checks routine. pragma Inline (Apply_Length_Check); pragma Inline (Apply_Range_Check); pragma Inline (Apply_Static_Length_Check); end Checks;