65 lines
1.5 KiB
Plaintext
65 lines
1.5 KiB
Plaintext
|
ODROID-C2
|
||
|
|
|
||
|
|
Intro
|
||
|
|
=====
|
||
|
|
To be able to use ODROID-C2 board with the images generated by
|
||
|
|
Buildroot, you have to prepare the SDCard or eMMC.
|
||
|
|
|
||
|
|
How to build it
|
||
|
|
===============
|
||
|
|
|
||
|
|
$ make odroidc2_defconfig
|
||
|
|
|
||
|
|
Then you can edit the build options using
|
||
|
|
|
||
|
|
$ make menuconfig
|
||
|
|
|
||
|
|
Compile all and build rootfs image:
|
||
|
|
|
||
|
|
$ make
|
||
|
|
|
||
|
|
Note: you will need to have access to the network, since Buildroot will
|
||
|
|
download the packages' sources.
|
||
|
|
|
||
|
|
Result of the build
|
||
|
|
-------------------
|
||
|
|
|
||
|
|
After building, you should obtain this tree:
|
||
|
|
|
||
|
|
output/images/
|
||
|
|
+-- bl1.bin.hardkernel
|
||
|
|
+-- bl2.package
|
||
|
|
+-- bl301.bin
|
||
|
|
+-- bl30.bin
|
||
|
|
+-- bl31.bin
|
||
|
|
+-- boot_new.bin
|
||
|
|
+-- boot.scr [1]
|
||
|
|
+-- boot.vfat
|
||
|
|
+-- fip.bin
|
||
|
|
+-- Image [2]
|
||
|
|
+-- meson-gxbb-odroidc2.dtb
|
||
|
|
+-- rootfs.ext2
|
||
|
|
+-- rootfs.ext4
|
||
|
|
+-- rootfs.tar
|
||
|
|
+-- sdcard.img
|
||
|
|
+-- u-boot.bin
|
||
|
|
+-- u-boot.img
|
||
|
|
+-- uboot-odc2.img [3]
|
||
|
|
|
||
|
|
[1] This is the ODROID-C2 configuration file used in u-boot.
|
||
|
|
[2] This is the ODROID-C2 kernel image file which will be booted.
|
||
|
|
[3] This is the ODROID-C2 signed u-boot image which will be used.
|
||
|
|
|
||
|
|
How to write the SD card or eMMC
|
||
|
|
================================
|
||
|
|
|
||
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
||
|
|
in the output/images/ directory.
|
||
|
|
|
||
|
|
Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":
|
||
|
|
|
||
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||
|
|
|
||
|
|
Insert the SDcard into your ODROID-C2, and power it up. Your new system
|
||
|
|
should come up now.
|